1. Do not open the Dive Case while it is wet.
2. After using the product in seawater, take out X3 and soak the Dive Case in fresh water for at least 60 minutes (ensure the Dive Case is firmly closed beforehand). If the Dive Case is not rinsed after use in seawater, residual salt may crystalize in gaps. These salt crystals will not dissolve in water and can lift the rubber seal and cause water leakage. After soaking the Dive Case in fresh water, rinse it under gently flowing tap water. Never apply a strong water stream from a single direction, as it may cause water leakage.
3. Ensure that the dive case is firmly closed before washing. After washing, wipe away any water droplets remaining on the surface with a soft, dry cloth and leave to dry. Ensure there is no sand on the Dive Case before drying as sand may scratch the product surface when wiped with a cloth. Do not dry with a hair dryer or any other heat source.
4. Do not store the Dive Case in a hot or humid environment. For example, do not leave it inside a hot car.
5. Do not wash the Dive Case with soap, neutral detergent, or alcohol cleaning products. This may degrade the waterproofing performance.
6. Store the product in a dry, well-ventilated location.
7. Secure the Invisible Dive Case tightly with the screw when mounting on the Invisible Selfie Stick. Keep them in a straight line to prevent the Invisible Selfie Stick being visible in the footage.
8. Please use X3 firmware version v1.0.80 or above.
Description:
100% brand new original
Name: Fully Invisible Diving Shell
Material: PC, optical lens
Size: 15.5 * 8.4 * 8.4cm
Suitable model: For Insta360 X3
Features:
360 ° fully invisible without blind spots.
Underwater seamless panoramic stitching.
Supports a waterproof depth of 50m.
High definition optical lens.
Use it with an invisible selfie stick to obtain an exciting third person perspective
Checklist:
1 * X3 fully invisible diving shell
10 * Anti fog film
4 * Anti loosening gasket
1 * Wrench
1 * 1/4 "adapter
1 * 1/4 "screw fixing rod
1 * Portable storage bag
1 * Usage theory
Attention:
1.Before first use, please upgrade the camera firmware to the latest version.
2. Before inserting the camera, long press the Q button on the side of the camera to enter "diving shell mode" or slide the camera screen to enter the shortcut menu, click the icon to switch the camera to "diving shell mode". At this point, you can click button 1 on the side of the diving shell (corresponding to the camera power button) to switch to shooting mode. Click button 2 on the side of the diving shell (corresponding to the camera Q key) to start/end shooting. For detailed instructions on the button, please refer to the camera beginner's guide.
3.Before inserting the camera, please ensure that the camera lens and the inner wall of the diving shell are clean and free of dirt.
4. When placing a camera, it should not be equipped with lens protectors. Please be careful not to scratch the lens.