250+ MILES not only my results but customers also are reporting 250+ miles distance 

AntennaZ 1090 MHz ADS-B MK 2.3 TUNED ANTENNA  / AERIAL

Each antenna we make is hand-made and tuned with an antenna analyser. We zero (calibrate) our meters before each antenna is made, ensuring all our antennas are tuned correctly.

For flightradar24, adsb hub, adsb exchange, flight-aware, planefinder, opensky (i think i remembered them all)

I would always recommend a good quality 50 Ohm coax cable. 

Cheap RG58 is very lossy for these frequencies 1090 MHz - 1.09 GHz  

Connector: N-TYPE Female

Colour: White 

Antenna weight:72g / 100g including mount

Lenght:250mm x 25mm

SWR:1.5 or below

Built in-house and all tuned when made (not mass produced)

Up to 35mm external diameter pole

1 x 1090 MHz Antenna Complete with mounting bracket and U-bolt.

For best results with ANY ADS-B antenna is to get them as high as possible, with the shortest route of 50 Ohm coax cable as possible, do not use 75 Ohm coax.

I myself have my raspberry pi in a project box at the base of the antenna with a pigtail of 160mm for maximum results.

(Please check that your cable is not an RP pigtail. Make sure your pigtail has pins poking out both ends) 

Please visit my shop for other listings

pictures 13,14,15,16 sent in from one of our customers, showing off his installation and reception of our 1090MHz ADSB antenna.

many thanks for that, please feel free to send us your pictures.