Description

Introduction
CMS60D1 Pulse Oximeter adopts Photoelectric Oxyhemoglobin Inspection Technology integrated with Capacity Pulse Scanning & Recording Technology, which can be used to measure human oxygen saturation and pulse rate through finger. The device is suitable for use in family, hospital, oxygen bar, community healthcare and physical care in sports, etc. (It can be used before or after exercise, but not recommended to use during exercising).

Features
1.Display of SpO2 value
2.Display of pulse rate value and bar graph
3.Display of pulse waveform
4.Display of PI value(selection function)
5.Chinese and English bilingual switch
6.With function menu
7.Clock function
8.Review function
9.Code lock protection alarm function
10.Alarm function(Finger out or out of limit)
11.Battery power indication, Ultra low power warning function
12.Adjustable screen brightness
13.Adjustable sound volume
14.Restore factory Settings
15.Storage function for SpO2 and PR values, and data stored can be uploaded to PC
16.Real-time data can be uploaded to PC
17.Bluetooth connection to PC(optional)
18.External SpO2 probe can be connected

Performance
Display mode:2.8'' color screen
Screen resolution: 240* 320
SpO2 measurement range: 0 % ~ 100 %(resolution: 1 %)
Accuracy: 70%~100%: ±2%
0%~69%: unspecified
PR measurement range: 30 bpm~250 bpm(resolution: 1 bpm)
Accuracy: ±2 bpm during the pulse rate range of 30 bpm ~ 99 bpm and ±2% during the pulse rate range of 100 bpm ~ 250 bpm.
PI(selection function) measurement range: 0 % ~ 20 %
Accuracy: 1% ~ 20 %, allowable absolute error: ± 1 %;
                 0 % ~ 0.9 %, allowable absolute error: ± 0.2 %
Accuracy under low perfusion: low perfusion 0.4 %, SpO2 accuracy: ± 4 %; PR accuracy: ±2 bpm during the pulse rate range of 30 bpm ~ 99 bpm and ±2% during the pulse rate range of 100 bpm ~ 250 bpm.
Light interference: compared to the values measured in normal condition and ambient light condition, the deviation: ≤ ± 1 %.
Power consumption: ≤ 0.84V·A
Working voltage: DC3.3V ~ 4.2V
Battery: A rechargeable built-in lithium battery, after the power failure of the equipment, the battery can continue to work.
Battery life:Charging and discharging not less than 500 times
Safety class: ClassⅡ, type BF applied part

Physical characteristic
Dimension: 159 mm(L) × 72 mm(W) × 31 mm(H)
Weight: about 250 g(including battery)

Payment

We accept Paypal Payment.

Shipping

Clearance: we will ship your item to your confirmed address.
Buyers' responsibility to pay duties,taxes and other extra charges by the government in your country.

Terms of Sale

Buy safe Products
The following FDA Disclaimer is required for all eBay listing in Healthcare category and is included for REFERENCE: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.If the item is subject to FDA regulation, We will verify your status as an authorized purchaser of this item before shipping of the item. If you have questions about legal obligations regarding sales of medical devices, you should consult with the FDA's Center for Devices and Radiological Health.
The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG) with the code 197923, and certified by FDA of United States and CE,TUV of Europe.The Fingertip Pulse Oximeter that is FDA 510K Approved.

About Us

Contec Medical Systems Co.,Ltd; 20 Years manufacturer,we have stock in USA and China.

Contact Us

Please contact us through eBay Message, we are on line to reply your message within 24 hours.
Wechat/Whatsapp/Mobile:+86 18716007715
Email:tessy.zhang@contecmed.com