Universal Car Start Stop Keyless Entry System Engine Start Alarm System Push One-button Starter
key word:
Car Alarm system
Passive Keyless Entry
PKE
One Button Start Stop system
One-button start system
Remote remote preheating refrigeration
PKE anti-theft device
PKE burglar alarm
Smart one-button start
Remote start engine
Product Information:
Product Name:Auto One-button Start System
Product features: One-button start/shutdown, remote remote start, PKE keyless entry auto-sensing unlock and lock, oil pump detection, identity recognition, anti-theft alarm, driving padlock, central locking automation, remote control trunk (the original car need to have a trunk motor), double door flashing lights,vibration alarm function, enter burglar signal light flash reminder, etc.
Applicable to: 12V vans, pickup trucks, SUV and other universal products
Operating voltage: 12V±3V
Quiescent current: < 10mA
Features:
1. One button starts, one button turns off.
2. Start the engine remotely, turn off the engine remotely, count down for 10 minutes, and automatically lock the door by remote control.
3. Keyless entry, PKE function. Remote control 3D encryption technology, hundreds of millions of rolling passwords, safe and reliable. 3D sensing antenna, 360 degree no dead angle, no jump lock, signal stability.
4. Oil pump detection function, foot brake detection function, motor protection function.
5. Anti-theft function:
a.After the sensor function is turned on, the remote control is not in the sensing range and the vehicle cannot start normally. After 2 minutes of flameout, the door will automatically enter the arming (without locking the door) even if the door is not closed.
b. When driving, the remote control leaves the vehicle. When the parking is turned off and the door is opened, the system immediately enters the anti-theft state, and the vehicle cannot be used normally again unless the remote control appears in the sensing range.
c. After the vehicle enters the anti-theft state, it will illegally step on the brakes, and the car will make a 25-second horn to sound the alarm.
d. In the anti-theft state, if the alarm is triggered, when the unlocking is released, the horn will beep 3 times (the silent state speaker does not sound), prompting the vehicle to trigger an alarm.
e. Turn off the fire and unlock the state. Press the remote control to enter the silent mode. If the alarm is triggered, the speaker will not beep. To exit the silent mode, first press the unlock button once, then press .
6. The central control door lock automation (driving lock, unlock after the flame),
7. Truck release(-)
Product parameters:
Ambient temperature: -40c - +80c atmospheric pressure 86-106KPa
Relative humidity: 10%-95%
Working voltage: DC12V +/- 3V
High frequency: 433.92MHZ, low frequency: 125KHZ
Package Included:
Unit*1
Remote control*2
Vibration sensor*1
Start harness*1
Function harness*1
LED indicator light*1
Induction antenna*2
Start button*1
Use manual*1