It is ready to go just requires cabling and speakers, any 4-8 ohm units will work with this system, cabling is a mixture of Cat 5 & speaker cable.
The Control units can be Rack mounted I can supply mounting brackets if required.
Viewing is available and it can be demonstrated working if required. Postage can be arranged Items will be boxed appropriately Please contact if you require it to be posted as the Items are quite heavy. Please only buy if you are resident in the UK I cannot ship abroad.
Included in the listing as follows:
1 Opus MCU610 controller. Fitted with a dab radio module and network UPNP receiver can detect music files on network hard drives or any UPNP equipped device.
1 VMX610 HDMI 1080p video matrix
6 WCU365 touch screen keypad
1 WCU657 touch screen keypad (large)
6 DZM20 Amplifiers
2 power leads
1 serial control lead to connect MCU to VMX
1 Remote control SRC610
1 32 gig SD card with Complete software and installation instruction etc.
System is fully configurable via simple supplied software but can also be used as plug and play with standard software already installed.
The latest fully working firmware is installed on all devices with correctly working time clocks, all modules and have been tested including Keypads, amplifiers Main control unit and video matrix.
The system can be used to control external devices via 3 x communication ports such as lighting & 4K third party video matrix.
The 1080p matrix supplied can accept 4 x 1080p HDMI inputs and can output to 6 zones and 2 virtual zones. It also supplies the 6 Keypads with video sources which can be controlled via the touch screen.
As well as above it has 3 extra configurable for RGB/Composite/SV
Although not an installer i have some knowledge I on the programming/Hardware installation and can give limited Telephone support if required.
System MCU610 is a multi-room audio system 6 built in zones with the possibility of 6 extra subzones using WCU330 or 316 sub zones not included.
Supports 6 main sources plus 6 zone by zone sources and a further 3 built in sources, any source can be output to any Zone.
DZM20 Amplifiers output stereo at 20 watts RMS per channel, these are all supplied and controlled via the MCU610 they also have line level stereo outputs for inputting to a subwoofer or other device, All inputs and outputs have been tested and found to functioning correctly.