SS-331H Digital LCD Desoldering Station Electric Desoldering Gun Tin Sucker 220V

(The item does not support 110V)


Description:
SS-331H LCD desoldering station is efficient desoldering tool with a built-in vacuum for through-hole boards and components. It is a thermostatically controlled desoldering station that provides low cost and high performance. Ergonomically friendly structure allows one hand operation, only takes a few seconds per pin, more safe, efficient and comfortable.


Features:

- High power desoldering tool with vacuum

- Efficient operation, quick and easy

- Microprocessor Controlled, provides accurate temperature control from 160 to 480°C

- Ceramic heater, provides fast heat up, fast recovery and high insulation resistance

- Designed with a quality heating element, it provides higher performance and longer lifetime than traditional type
- Built-in high power 600mmHg air pump, particularly for lead-free desoldering of multilayer boards

- Large LCD display

- Quick and easy to set the desired temperature and check the actual temperature.
- Fahrenheit or Celsius unit selection.
Specification

Type: Electric Desoldering Gun

Model:SS-331H

Voltage:220V 50Hz (NOT support 110V)

Soldering Power:90W

Power Consumption:140W

Temperature:160°C ~ 480°C

Vacuum Pressure:>600mm Hg

Heating Element:Ceramic Heater

Size: 172*135*190mm

Weight: 2.0kg

SS-331H Correct Use

1.After each work, it is recommended to suction 3-5 times and empty the residual tin in the tube;

2.If the interval between use is about 20 minutes, it is recommended to clean the steel pipe with a needle after air suction;

3.It is found that the suction is reduced during use, please clean the steel pipe with a needle;

4.If the frequency of use is very low, it is recommended to adjust the tin gun to about 200 degrees, and then to the working temperature when using;
5.When the tin slag in the tin storage cylinder is about 1/2, it should be cleaned in time. When the filter cotton is found to be hardened, it needs to be replaced in time.

What's in the package:

1x Electric Desoldering Gun
3x Nozzles
4x Filter sponges
3x Needles
1x User manual
Start selling to international eBay sites.
eBay Cross Border Trade powered by ChannelEffect