Reference number in our online shop: BLV2W639

The emulator is a diagnostic device designed to verify the correctness of the car's electrical installation and to determine whether the SRS/Airbag warning in your car is triggered by a defective seat mat sensor. The emulator sends a signal of occupied seat which simulates a situation where a person is sitting in the passenger seat. To make the emulator work, you need a diagnostic scanner (such as Autel, Bosch, iCarsoft, etc.) to remove the old fault code of a defective seat mat that is stored in the ECU. Once you connect the emulator, your diagnostic scanner will be able to remove old errors and turn off the SRS/Airbag warning. The emulator is intended for diagnostic use only. The emulator is not a factory device. It should not be used as a substitute for an original sensor. After performing the diagnosis, you should disconnect the emulator and reconnect the original sensor.

The seat occupancy mat is a sensor installed in the front passenger seat. The other names of the seat mat sensor are: "Automatic Child Seat Recognition", "AKSE", "Component B48", "Front Passenger Seat Occupied and Child Seat Recognition", "SA Code U18", "9025". The SRS (Supplemental Restraint System) is a system that includes airbags and multiple sensors distributed in the seats and throughout the car which can turn on the SRS/Airbag warning. The seat mat sensor is one of many sensors that can turn on the SRS/Airbag warning when it is defective.

This offer includes:
- Seat mat emulator and seat belt buckle emulator built into a small box (dimensions: 3 x 2 x 1.5 cm);
- Detailed installation manual (included with the emulator);
- Our technical support until the problem is resolved;
- 24-month warranty.

FOR FOLLOWING CARS:

Mercedes-Benz cars with a seat mat connector with 3 pin holes and 3 wires in colors: brown, red, white. Please check your seat mat connector and compare it with the photos or contact us before purchase if you are not sure how to find the correct connector. This emulator will not work with seat mats with 2 or 4 wires.

- Mercedes-Benz G-Class W463 (2001-2008)

Important information

• Before making a purchase, scan your car using an OBD diagnostic scanner (such as Autel, Delphi, iCarsoft, etc.) to confirm that the SRS/Airbag warning in your car is caused by defective seat mat. The SRS/airbag warning can be activated by at least 5 sensors within the passenger seat and numerous other sensors throughout the vehicle. If the SRS/Airbag warning light is caused by a faulty seat mat, your diagnostic scanner will be able to turn it off after the emulator's installation. The SRS/Airbag warning light will persist if the problem in your car is caused by a different sensor. After performing the diagnosis, you should disconnect the emulator and reconnect the original sensor.

• The emulator is safe for your car's electrical system and does not require cutting and soldering wires. After connecting it, you can disconnect it from your car at any time and safely reconnect the original sensor, restoring the electrical system to its original state. Do NOT cut the wires! The emulator will not work with cut wires.

• The emulator will not work if your OBD diagnostic scanner shows problems with the SRS/Airbag Control Unit (Module N2/7). The seat mat sensor is connected to the Control Unit so when the Control Unit does not work, then the seat mat does not work as well. In most situations the original seat mat is not defective. You just need to fix a problem with the Control Unit to restore functionality of the seat mat sensor. Please contact us before purchasing for additional assistance.

• The emulator might not work if the diagnostic scanner shows a fault code that states "seat occupancy mat - an internal component fault" or "seat occupancy mat - wrong coding". These fault codes usually indicate problems with the SRS/Airbag Control Unit, not the seat mat sensor. Please contact us before purchasing to verify this problem.

• Never disconnect the battery to clear the warnings, fault codes or to connect the emulator. The SRS/Airbag Control Unit usually loses its settings after disconnecting the battery, and it will require restoring the settings to the original state (which is not easy). If the SRS/Airbag warning in your car has appeared after a problem with a discharged battery or a weak battery, we recommend that you contact us before placing an order. We will guide you how to solve this problem.

I have the SRS/Airbag warning or Front Seat Malfuction. What should I do first?

Scan your car with an OBD diagnostic scanner to check which sensor is responsible for the warning. These warnings are NOT always an indication that the problem is caused by a defective seat mat. Mercedes installs at least 5 sensors in the passenger seat and many more sensors in other sections of the car that can cause the SRS/Airbag or Seat Malfunction warning. For example the warning might be also caused by a problem with: SRS/Airbag Control Unit, Collision Sensor, seat belt pretensioner, seat belt buckle sensor, ignition squib, etc.

The most common diagnostic fault code for the defective seat mat are "Component B48 - front passenger seat occupied sensor is faulty", "LIN Bus 1 is faulty", or "9025", but these codes and descriptions may differ depending on the diagnostic scanner you are using. You can take a photo of the fault code and its full description that appears in your diagnostic scanner and send it to us for verification. We will check it and let you know.

EMULATOR INSTALLATION:

1. Disconnect the seat mat sensor and connect the emulator. Turn on the engine and check if the LED light on the emulator flashes in two colors different colors (usually blue an green).

2. Connect a diagnostic scanner (e.g. Autel, Delphi, iCarsoft, Xentry, INPA, etc.) to the car's OBD port located under the steering wheel and remove the old DTC fault code of the defective seat mat from the SRS/Airbag Control Unit.

3. Now scan the new fault codes to check if the defective seat mat fault code has disappeared for good or reappeared. The SRS/Airbag warning should be turned off when the fault code is cleared. This is an indication that the problem in your car is caused by a defective seat mat.

4. After successfull diagnose of the problem disconnect the emulator and re-connect the seat mat sensor.

Detailed installation instruction will be included with the emulator. Please contact us in case of any problems. We will help you.

Please, do not use Carly or cheap diagnostic scanners. In most cases they can read the fault codes from the SRS/Airbag Control Unit, but are not able to clear them so you will not know if the problem in your car comes from the defective seat mat. If, after connecting the emulator, the fault code status changes from "Current & Stored" to "Stored" (meaning the problem is historic) and you are not able to clear the fault code then you need to use a different scanner because your scanner is not able to clear the fault code.

The fault code disappeared but the SRS/Airbag light is still present and now it is flashing. What should I do?
It means that the SRS/Airbag Control Unit is unlocked and needs to be locked by doing an Initial Startup procedure. The control unit sometimes unlocks itself when there is a problem with the SRS system (like a defective seat mat sensor). The warning light will be turned off once you perform the Initial Startup in your diagnostic scanner and lock the control unit.

LEGAL NOTICE / REMINDER

The emulator is intended for diagnostic use only. It is a diagnostic device designed to verify the correctness of the car's electrical installation and to determine whether the SRS/Airbag warning in your car is triggered by a defective seat mat sensor. The emulator is not a factory device or a substitute for the original sensor. After performing the diagnosis, you should disconnect the emulator and reconnect the original sensor. In the event of an accident, the passenger airbag will ALWAYS deploy (with or without a passenger in the seat) if the emulator is connected. Do not place a child seat on the front passenger seat! We strongly advise informing all users of the vehicle about the presence of the emulator. Ensure that fitting this emulator for diagnostic purposes does not violate any laws in your country. By making a purchase, you agree that we are not liable for any damages or losses that may arise from the use of the emulator, and we are not responsible for any issues with your airbag system. We are not responsible for direct or indirect damage or injury caused by improper use of the device.

1. Before purchase we do recommend that you send us the chassis number (VIN) of your car to check the compatibility of this part. Car makers use different variants of parts for the same vehicle, for example a Mercedes C-Class W204 model has 4 different variants of braking system.
2. Compatibility table in this listing should be used as a guide only! We do our best to list items with as many details as possible, but car makers use different variants of parts for the same vehicle (e.g. depending on additional equipment, country of production of the car, year of production, etc.). This part might not fit your car even though the compatibility table says it will fit. Please, compare the OE part number (OE Reference) with the original part number used in your car or contact us if you're not sure this part fits your car. We will check compatibility and respond as soon as possible (usually within a few working hours). This will avoid disapointment of receiving a part that will not fit your car.
3. Orders are processed from Monday to Friday from 7:00 am to 3:00 pm London Time, excluding public holidays and days we have mentioned in Point 4. Orders placed outside of our working hours will be processed the next business day.
4. We do not process orders during public holidays and during following days: January 1, January 6, Easter Monday (movable feast), May 1, May 2, May 3, Corpus Christi (movable feast), August 15, November 1, November 11, December 24, December 25, December 26.
5. Combined shipping of a few items is possible. Add desired items to the basket and go to the checkout. eBay will calculate the shipping cost automatically.
6. You will receive a confirmation email from us after placing an order. It will contain a link to your Order Summary page where you can check all details of your order, current status and a history of all emails sent to you by our system. Once the parcel is sent the page will also contain the tracking number, invoice and photo of your parcel. The order summary page is unique just for your order and no one without the link is able to see it.
7. For buyers located outside the European Union: import duties, taxes and other local fees are not included in the item's price or shipping cost. These charges are the buyer’s responsibility. Since BREXIT this also applies to buyers from the United Kingdon (except Northern Ireland).

1. We usually dispatch orders within 1-2 working days after receiving payment. Sometimes we might need to ask a buyer some questions to complete the order properly. We can extend the shipping time up to 3 working days in such cases.
2. All items will be dispatched to the address given on the order details. Make sure it is correct and include both door number and the street name. We cannot change the delivery address after the package has been shipped. Please ensure that somebody is available on the given address to collect the parcel. If the parcel will be returned because you provided an incorrect address or you did not collected the parcel we will deduct the return shipping cost from a refund as we are charged by the carriers in such situations.
3. You can check the shipping cost to your country in the "Postage and payments" tab. You can also add the desidered items to the basket and eBay will calculate the shipping cost to your location automatically.
4. We use only tracked parcels from the following carriers: FedEx, TNT, DPD, InPost, Postal Service. You will receive an email from our system that will contain the tracking number and carrier at the time we hand over the package to the carrier.
5. Parcel damaged during transport: if upon delivery the parcel looks damaged, please refuse delivery and fill the damaged parcel report with a courier. In all cases if the parcel is damaged and if you choose to accept it please sign for the item as damaged and report to us as soon as possible and at least within 12 hours of delivery.
6. Please remember, delivery time presented on eBay is estimated. It may be impacted by many factors beyond our control once the parcel leaves our facility (for example: carier's operational delay, weather conditions, peak periods, situation on the borders, etc.). We suggest to order items well in advance if you have a special occasion or event that you wish to use the item for.

1. We offer 30 days return policy for a refund or exchange starting from the moment you receive the order.
2. Please contact us first before returning the order so that we provide a correct return address for your order. Parts do not necessarily go back to the location from which they shipped. Please, mark your parcel with your eBay name or RET number received from us. This will speed up the refund or exchange process.
3. The customer is obliged to return the product in a condition not exceeding what is necessary to establish the nature of the product, as well as its characteristics and functioning. The customer is responsible for the decrease in the value of the item as a result of using it in a way that goes beyond what is necessary to establish its nature, characteristics and functioning. If the item is found to have been used in a way that goes beyond what is necessary to establish the nature of the product, the value is reduced by the amount constituting the cost of bringing the goods to factory condition.
4. The parcel remains your responsibility until it arrives to our warehouse - remember to pack the item in a way that will avoid any damage in tranit. Carriers very often do not handle parcels delicately. Items returned in damaged condition will not be accepted and no refund will be issued.
5. Buyer returns the order on his expense. Unless the item is defective or there was something wrong on our side - in that situation you may qualify for a pre-paid label.
6. All returned items are verified before refunds are given. If the buyer selected a wrong reason of return on purpose just to receive a pre-paid return label then we will deduct the return shipping cost from the refund and we will report that situation to the eBay Customer Support.
7. Once the return arrives to our warehouse we will process the refund or exchange within 2 working days. We do not accept COD returns.
8. Refusal to collect the parcel, failure to collect the parcel on time or failure to deliver the parcel due to the incorrect address provided by the customer in the order is NOT considered as a return of the order. In such situations, our company is charged by the carrier for return. The return shipping cost is higher than the cost of shipping to the customer. In this case, the amount of the refund will be reduced by the costs of return, which we have been charged by the carrier.

1. An electronic invoice for the purchase of goods will be sent to your email by our system in the email with the tracking number. We do not enclose paper invoices. Check SPAM folder on your email inbox if you have not received email with the invoice. THe invoice is in PDF format and some email operators might mark the email as SPAM.
2. Information for customers located outside the European Union (orders delivered outside the EU): we are not responsible for shipments stopped by the customs office in the country of destination. Customers are solely responsible for complying with local laws and paying all local taxes and import duties.
3. Before collecting the package, check that the outer packaging is not damaged or has not been opened. In the event of damage or if you are concerned that the contents of the package may be stolen, please fill out the report with a courier.
4. All items are covered by the warranty provided by the manufacturer or distributor. Information on the duration of the warranty is presented in the product's description.
5. If you are satisfied with your item a positive feedback would be appreciated! This is an important information for us that the transaction was successful. If something went wrong, please contact us before leaving negative feedback! Any problem will be resolved by our support team. We always will do the best for both sides to be happy!

✔️ All items are quality checked before shipment.
✔️ All shipments have tracking numbers.
✔️ Dedicated order summary page with all information about your order, photo of your parcel and automated email notifications.
✔️ Huge range of parts for all car brands.
✔️ Original new parts from all well-known manufacturers at the best prices.