Dean Zelinsky LaVoce

[Dean's new brand]

A new brand by Dean Zelinsky, founder of Dean Guitars.

This is a revolutionary model that proposes a new body shape and sound based on the new Les Paul shape by Dean Zelinsky, whose brand bears his own name.

[MOD added to multi-functional specs]

The body is maple

It has an extremely thin ultra-thin body that is easy to handle.

The neck is maple and the back of the neck has Z-GLIDE REDUED FRICTION NECK.

The neck design was designed by Dean Zelinsky himself to allow for smooth position changes during play.

It is designed to reduce the feeling of your hands being stuck, which is typical of gloss painting, and to prevent excessive moisture from forming on your palms and the back of the neck, allowing for smooth position changes.

The fingerboard uses rosewood

Approximately 628mm scale, 22 frets, set neck specification.

Since the output jack is on the top, the width of the side jack can be omitted, making the curved body thinner.

The pickups are humbuckers at the front and a pair of Seymour Duncan SH-6 Distortion pickups at the rear.

There is also a piezo terminal under the bridge saddle, and a mini switch allows you to switch between magnet, piezo, and mix.

Originally, it came with a POT with a switch function, but it was replaced with a mini toggle because it was difficult to use.

Also, the rear pickup escutcheon has been replaced with a SHADOW E-Tuner.

Tuning possible. It can also be done with live sound.

By installing a tuner on the main body, it is also possible to organize heads and effector boards.

In addition, both the front and rear are equipped with coil taps, allowing for a wide range of sound makeup.

Controls are 1 pickup volume, 1 piezo volume, 1 tone (

3way pickup select toggle switch

Piezo/magnet switching mini switch specification.

*The original mini switch was a knob switch, but it seems that it has been changed to a mini switch.

It goes well with Duncan, and the clear hum sound and wide-range tap sound are impressive.

You can enjoy piezo alone or as a mix, so you can easily use it for different purposes despite its multifunctionality.

The condition is that the neck is flat.

There are minor scratches and dullness of parts due to use.

The rear pickup has been replaced.

The piezo selector switch has been replaced with a mini switch.

The string height is 12F, 6th string approximately 1.8mm, 1st string approximately 1.6mm.

The truss rod has plenty of room in both tightening and loosening directions.

The frets are about 80% thick and there are no parts that are low.

There is no chatter, no sound jamming, etc.

*Please check the photo for the external condition.

The product was photographed in a simple location and the photos were taken in bright light. Please refer to the darker colored photo as the actual color may differ.

[SPEC]

Body material: maple

Neck material: Maple

Neck shape: C

Neck warp: None

Fingerboard material: Rosewood (22F)

String height Treble-Bass: 1.6-1.8

Frets remaining: 8

Inlay: Diamond

Nut (width): Approx. 43mm

Peg: original

Scale: Approx. 628mm

Bridge: Original

String gauge used: .010-.046

Pickguard: -

Pickup: Seymour Duncan SH-6 Distortion & Piezo PU

Switch: 3way toggle switch, piezo switching mini switch

Control: 2Vol　1tone

Rod margin: I squeezed it a little when adjusting, but there was plenty of margin for both tightening and loosening.

Weight: 3.33

Accessories: Soft case

Serial: S1512557

 

Shipping by FedexorEMS (international express mail service, with Tracking and Insurance, handling cost). 
Fedex takes 1 week, EMS takes 1-2 weeks.
We will ship your item within 5 business days with carefully packed.

Money back guarantee within 30 days. 

We offer 30 days money back guarantee for defective products.
The buyer must pay for returning it back to us.
When there were defects in a item, please contact us.

If you have any problem, please contact us.  Your satisfaction is important to us. 

We have results that I sold of tens of thousands of by Internet sale.
We have pride ourselves in the Quality of items we offer.

All our items has been checked by technician. 

As every seller dealing with pre-owned branded items in Japan we have as well license from local government to offer services of this kind. 
We are officially registered as legal business and we have to comply with all rules and regulations including tax requirements from the Japanese government.

Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight (shipping) company or when you pick the item up - do not confuse them for additional shipping charges.
We do not mark merchandise values below value or mark items as “gifts” - US and International government regulations prohibit such behavior.