Orbit Pop-up Pulse XL 25-ft-45-ft Full-circle Impact Sprinkler
Item #1642023
Model #55201
For watering areas with up to 45 feet of spacing between sprinkler heads
3-inch pop-up riser height ensures that the nozzle clears medium grass
Low precipitation rate reduces risk of runoff and puddling for many soil types
The
Pulse XL pop-up impact sprinkler is engineered to handle the demands of
high-mineral content, dirty, and reclaimed water without clogging. The
double-weighted impact arm ensures reliable operation even under high
pressure. It is ideal for landscape areas which require a throw distance
of up to 45 feet between sprinkler heads. Its arc is adjustable from 20
to 360 degrees, which gives you the ability to aim it so that the water
hits the landscape only and avoids any hardscape surfaces. The rolled
lip surrounding the outside of the can creates a donut ring which
prevents grass from growing into it. The 3-inch pop-up height ensures
that the nozzle clears tall grass. It comes with a pre-installed 3
gallon per minute (GPM) nozzle which results in a full-pattern
precipitation rate of 0.18 inches per hour at 40-foot square spacing at
40 PSI. This very low rate reduces the risk of runoff or puddling for
many soil types and conditions. The 4 GPM and 2 GPM bonus nozzles which
allow you to create a matched precipitation effect for full (yellow
nozzle), half (pre-installed nozzle), and quarter (red nozzle) patterns.
It includes a radius adjustment screw which allows you to reduce the
impact throw down to 75 percent of its rated distance. The can and riser
stem are made from high impact ABS and the metal components are made
from stainless steel. Arc adjustment stops make setting the pattern
simple and tool free. You can create a full pattern by simply flipping
the trip pin up. The side inlet is 1/2-inch female pipe thread (FPT) and
the bottom inlet is both 1/2-inch and 3/4-inch FPT which allows for
higher flow. A slotted plug seals whichever inlet is not in use. The
typical method for installing or replacing a pop-up impact is on a
1/2-inch or 3/4" male pipe thread (MPT) riser into the bottom inlet or a
1/2" swing pipe fitting into the side inlet. The Pulse XL replaces
pop-up impact rotors from Orbit, Hydro-Rain, and other major brands.
Recommended operating pressure is 40 PSI. For outdoor irrigation use
with cold water only.
For watering areas with up to 45 feet of spacing between sprinkler heads
3-inch pop-up riser height ensures that the nozzle clears medium grass
Low precipitation rate reduces risk of runoff and puddling for many soil types
Pattern is adjustable from 20 to 360 degrees in precise increments
Radius is adjustable down to 75 percent of maximum distance
Large nozzle orifice helps prevent clogging of the nozzle in dirty water
Dual inlet ports accommodate either shallow or deep-burial lateral pipe
Combination bottom inlet accepts both 1/2-inch and 3/4-inch MPT risers
Compatible
with impact rotors from Orbit, Hydro-Rain, and other major brands and
can be controlled with a B-hyve smart controller for optimum water
conservation
Item Dimensions L x W x H: 9.38 x 5 x 5 inches