Features: 

9999 count auto-range digital multimeter

Battery-powered with true-rms

Large overview LCD digital display shows data clearly

Backlit display makes yout easy to read in the dark  

Allows for various electrical tests including Resistance, DC/AC Voltage and Current tests with a simple switch 

Easy to work, auto ranging accurately measures with self-calibration chip to make sure the accuracy and stability

One-handed operation, perfect choice for carry-on measuring

Small size, portable to take it anywhere

 

Specification: 

Model: AN8009 

Operating Temperature: 0 - 40 ℃ 

Operating Humidity: ≤75%RH 

Storage Condition: -20~60℃ 

Storage Humidity: ≤80%RH 

DIY Supplies: Electrical 

Operating Mode: Auto/Manual Ranging 

Measuring Inductance Range: no 

Measuring Temperature Range: -20~1000 C/-4F-1832F 

Measuring Capacitance Range: 9.99nF/99.99nF/999.9nF/9.99uF/99.99uF/999.9uF/9.999MF 

Measuring Voltage Range: 999.9mV/9.999V/99.99V/999.9V 

Measuring Current Range:60mA/600mA/10A 

Measuring Resistance Range: 99.99/999.9/9.999k/99.99k/999.9K/999.9M 

Frequency: 99.99Hz/999.9Hz/9.999KHz/99.99KHz/999.9KHz/9.999MHz 

Square Wave Output: 50Hz/100Hz/200Hz/300Hz/400Hz/500Hz/600Hz/700Hz/800Hz/ 900Hz/1000Hz/200 

DC/AC Voltage(mV): 9.999mV/99.99mV 

DC/AC Voltage(V): 999.9mV/9.999V/99.99V/750ACV(999.9DCV) 

DC/AC Current (mA&A): 999.9mA/9.999A 

DC/AC Current (uA): 99.99μA/999.9μA 

Display Type: Digital Display 

Diode Test: Yes 

Continuity: Yes 

Duty Cycle: 1%-99% 

Sample Rate: 3 times per second 

Power: 2x 1.5V AAA batteries (Not Included)

 

Package included: 

1 x Multimeter 

1 x Test lead+temperature sensor 

1 x 16pcs Test be

1 x User Manual

1 x Storage bag

 

Special description (Digital multimeter in millivolt gear, numerical beat is normal)

Multimeter mV file appears not zero phenomenon, mainly in the following cases:

1: The air ambient temperature, humidity changes too large lead to not return 0 phenomenon;

2: There is a strong electric field or magnetic field interference around.

3: The multimeter itself is faulty. When the multimeter does not return 0 phenomenon, you can be judged as follows: The multimeter dial to the mV file, the corresponding input hole into the red and black pen line, the red and black pen line short connection, at this time the multimeter display "0000" can judge the Multimeter does not return 0 phenomenon is due to environmental factors interference, this state does not return 0,

However, it is recommended to exclude environmental interference factors so as not to affect measurement accuracy to duce incorrect measurement results

 

Warning:

1. Do NOT exceed the “maximum value” indicated in the Specification 

2. Do NOT input voltage at the Current Mode, the Resistance Mode, the Diode Mode, the Continuity Mode, or the Temperature Mode 

3. Do NOT use the duct when the batteries or the battery cover is not placed perly 

4. Turn off the duct and remove the test leads from the test points before changing batteries or fuses 

5. Do NOT input voltage exceeds 36V DC or 25V AC when you are at the setting of measuring current

 

Note:

-Please allow 1-10mm difference due to manual measurement.

-Due to light and screen difference, the item's color may be slightly different from the pictures.