DC Voltmeter Ammeter Power Energy Digital Voltage Current Cap Ohm Hour SOC Meter LCD DC 60-200V 10A/50A/100A/200A/300A Shunt

 

 

This document describes the specification of the PZEM-013/015 DC multifunction battery tester, this meter is mainly used to test all kinds of battery’s voltage, discharge current, discharge power, discharge impedance, internal resistance, capacity, dump energy, energy consumption and running time, and display the measurement data through LCD screen.
 
PZEM-013: Measuring Range 10A (Built-in Shunt)
PZEM-015: Measuring Range 300A (need to be used with external shunt, no matter what current it test , can matched with 50A, 100A, 200A, 300A four kinds of shunt).
 
Function description
 
Voltage
 
Range 0~200v ( when test under 8V, please use the independent power supply mode)
The starting test voltage: 0.05V
Accuracy: 1%
 
Display format
 
<10V display as 9.99V
<100V display as 99.9V
>100V display as 199V
 
Current 
 
Range: 0~10A (Type: PZEM-013)
            0-300A(Type: PZEM-015) can set 50A 100A 200A 300A , 4 range depend on the external shunt, 100A in default
The starting test voltage: 10mA (Type: PZEM-013)
                                         20mA(Type: PZEM-015)
Accuracy: 1%
 
Display format
 
<1A display as 999mA
<10A display as 9.99A
<100A display as 99.9A
>100A display as 199A
 
Power
 
Range: 0~2000W (Type: PZEM-013)
            0-60000W(Type: PZEM-015) 
The starting test voltage: 0.1W (Type: PZEM-013)
                                        0.2W(Type: PZEM-015)
Accuracy: 1%
 
Display format
 
<10W display as 9.99W
<100W display as 99.9W
<1000W display as 999W
<10000W display as 9.99kW
>10000W display as 19.9kW
 
 
Inpedance=Voltage/Current
 
Range 0~100Ω
Accuracy: 1%
 
Display format
 
<100Ω display as 99.9Ω
>100Ω display as 199Ω
 
Internal Resistance=(full voltage-bring load voltage)/bring load voltage, when the bring load voltage is larger than the maximum voltage, the internal voltage is zero.
 
Range 0~999mΩ
Accuracy: 1%
 
Display format: 999mΩ, when over the test range or the current is zero,  it display"---"
 
Note: before you test the internal resistance, you should preset the full voltage depend on the battery type, after it is full charged, you can use it to test.
If it was not full charged, you can set the battery without load voltage to the full voltage, then test.
The internal resistance is not a fixed value, the more the battery discharged, the bigger resistance.
 
Capacity
 
Range 0~1000AH
Accuracy: 1%
 
Display format
 
<1AH display as 999mAH
<10AH display as 9.99AH
<100AH display as 99.9AH
<1000AH display as 999AH
 
SOC
 
SOC is display via the battery  symbol, totally 10 grids, every grid present 10% energy
SOC is calculated via the current battery voltage value, before test, you should preset the full voltage and cut-off voltage depend on the battery type.
Every grid voltage=(the highest voltage - the lowest voltage )/10
 
Energy
 
Range 0~19999kWh
Accuracy: 1%
 
Display format
 
<1kWh display as 999kWh
<10kWh display as 9.99kWh
<100kWh display as 99.99kWh
<1000kWh display as 999.99AH
>1000kWh display as 9999AH
Over the test range will become zero
 
Running time
 
Range 0~10999hour(without load the time will not accumulate)
Display format: 0:00:00~999:59
 
Over the test range will become zero
 
2. Operating instruction
  1. Payment is managed by eBay.
  2. We will ship to your eBay address. Please make sure your address setting is correct before checkout.
  1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
  2. Orders processed timely after the payment verification.
  3. The images shown are not the actual item and are for your reference only.
  4. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.
For all orders, please note that:
  • Taxes and charges are not included in the item price or shipping charges.
  • Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
 
  • We are committed to provide excellent service for all buyers.
  • Welcome to our eBay store:)
  • Our Working Time (Beijing): 9:00 am ~ 6:00 pm (Monday~Friday)
  • If the item is defective or taking longer than usual to reach you, please do not leave us negative feedback. Send us a message through eBay and we will resolve the issue promptly. Thanks for your support and understanding!
  • If you have any questions, please contact us via ebay mail, we will reply you on the working day in China. And there will be no reply as we are out of office during weekend, we will reply on Monday. Because the time zone between the seller and the buyer is different, please be patient and wait for your understanding. We will be happy to serve you.
PushAuction