5'' Automotive Inspection Camera 6.2-8.5mm Borescope Articulating Endoscope

The S10 is a high-performance industrial endoscope camera with a 5 inch HD color display. Its ergonomic design makes it easy to operate. In addition, the S10 includes self-storage to support photo and video functions as well as a Micro SD card expansion function (up to 64G).

This product is equipped with a small diameter HD camera with LED
auxiliary lighting. The camera contains a high-sensitivity chip, which can be used even in a dark working environment.

Addition, the S10 includes self-storage to support photo and video 

Auxiliary lighting. The camera contains a high-sensitivity chip, which can be used even in a dark working environment

Safety and Maintenance

Warning: This product is a Multifunctional Articulating Borescope camera and is not intended for medical use or human examination.

 

● Striking or dropping the camera may cause damage to the device.Pulling the cable could also damage the device.

● When used in an environment with sharp edges, please use it 

Pulling the cable could also damage the device.

● Striking or dropping the camera may cause damage to the device. 

● The camera probe is not made of heat-resistant materials. When 

checking an automobile engine, please ensure that the temperature in computer, 

the engine drops to normal temperature

● When not in use, please ensure that the lens and the main unit are 

clean and dry, and avoid contact with oils or any corrosive or dangerous substances.

● This product is not suitable for people with limited physical, sensory 

or mental abilities.

● Do not allow children to touch and operate this device.

● Please use a 5V household charger that meets the safety regula-

● This device supports charging while using.

tions to charge the equipment. Fast charging is not supported.

● If the device is not used for a long time, please ensure that it is charged at least once every 3 months to prevent irreparable damage caused by excessive discharge of the battery.

 

FAQ

1.Lag time is normal during photo output. the device, or reassemble the flexible conduit if lag continues.

2.Product crashes, does not output a picture or the screen turns black , Please press the reset button on the right side of the device to restart the device.

3.Imaging screen is not clear

The best imaging focal length of the product is: 2cm-10cm. Please calibrate the distance to the object, or clean the front of the camera with a clean alcohol cloth.

4.Product charging

Please use 5V 1A/5V 2A charger to charge the device. The product does not support fast charging.

5.The camera is hot

It is normal for the camera to heat up, especially when the camera 

LED light is on at the highest brightness. But it does not affect normal use or service life.

6.Micro SD card can not be recognized

Please confirm whether the Micro SD format is FAT32. lf not, please format it and plug and unplug the Micro SD card again. EU Environmental Protection Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your local authority or retailer for recycling recommendations.

 

Product list

1*endoscope

1*32G SD card

1*cable

1* instructions

1*bag

PushAuction