Product Description
-
Brand Model : Amptata T6
-
Global voltage standard ( 100V~240V )
-
9pin probes cable lengh: 55cm
-
T6 diy tester can measures the cathode current of the power tube for bias reading (at low voltage side of the tubes)
-
T6 test tool is through multimeter get tube's mA
-
It does not need any convert from mV to mA
-
T6 can be work with all kinds of multi meter (Digital meter or analog pointer meters) ,at range of 100mA or above
-
T6 can test many types. At present,We have 8pin and 9pin probes options
-
This listing T6 suitable for EL84 6BQ5 6P14 etc.
-
High-Quality 24K Gold Plated Banana Plug Male Speaker Cable Connectors
-
Bakelite socket and gold pins for long life,Tough gold pins with a thick gold plating
Package Contents
-
1pcs T6 Tester Body
-
2pcs 9pin Bias Current Probes
Note:
-
01: Keep the amplifier silent during use T6
-
02: Turn off speaker sound,Do not turn on sound play songs
-
03: Insertamplifier just is let the tube get power and warm up
-
04: Read most accurate's tube cathode current in working state
How to use:
-
01: Set multimeter to the mA range (most common is 200mA)
-
02: T6 Black banana plug into COM jack of multimeter
-
03: T6 Red banana plug into mA jack of multimeter
-
04: Turn off amplifier
-
05: Remove the tubes then plug in T6 socket
-
06: Then plug T6 in amplifier socket
-
07: Turn off speaker sound turn on amp (Keep amp silent) and
let tubes get warm about 5 minutes,Just turn on the amplifier without
let speaker sing
-
08: Read the bias measurement
-
09: Switch up and down. Get two reading
-
10: If tube reading is same.That's perfect,If reading is
different,Should be no more than 2 or 3 mA difference for a good balance
between the tube