Supply Boost Plate DC-DC Boost Module Charger Board Converter Step Up Module

 



Size: as picture shows
Brand new and high quality
Weight: about 37g
Port: Type-C
Voltage: 5V, 9V, 12V
Overview:
- UPS-15W module can realize the seamless switching of external power supply and battery dual power supply (no delay), suitable for uninterrupted power supply schemes such as low-power DC equipment and meters, and self-start after power failure and self-charge when power is received.
- The UPS-15W module integrates four practical functions of lithium battery charging, lithium battery protection, boost output, and UPS switching. It is also equipped with a universal Micro USB charging interface, direct DC5V input to charge the lithium battery, two-color LED indicates the charging status, and the full green light Always on, automatically stop charging, the module is equipped with two high-quality 18650 battery holders to choose from.
Function description:
1. UPS function: When the power supply is powered on, the power supply directly supplies power to the load via the booster circuit, and simultaneously charges the lithium battery. Once the power is cut off, the battery path is automatically activated to supply power to the load via the boost circuit.
2. Boost circuit: pek power up to 20W, rated power up to 15W, BOST boost circuit, built-in 12A high current MOS, efficiency up to 96%, module static power consumption 25mA, optional 5V/9V/12V output. (The load is recommended to be <15W under normal conditions. Output 5V: current 3A, output 9V: current 1.6A, output 12V: current 1.2A)
3. Lithium battery protection: over-charge, over-discharge, over-temperature, over-current protection (if it enters the protection state and does not output after a short-circuit by mistake, it will automatically activate and restore output when connected to 5V charging).
4. Module size: 89*42*22.4mm (back patch battery box)
Instructions for use:
1. When used as a UPS, it is necessary to install a battery to ensure that the input 5V power supply has sufficient power, and the output is kept on in real time, and the battery can be started at any time when the power is off.
2. If the UPS wants to save energy consumption, solder down the output indicator after all tests are completed, which can reduce the current consumption of more than ten mA without affecting the normal output of the circuit, which is more power-saving.
3. During the use and operation, the board may be triggered to enter the protection state without output due to various reasons (incorrect touch, wrong connection, etc.). After troubleshooting, connect the board's charging port to 5V for charging, and the board is powered on again. Re-output can be activated.
4. The 5V charging power supply used by individual users uses a relatively large output capacitor. This capacitor can continue to discharge after the power is turned off, so that the power supply voltage has a slow drop process, which will cause the board after the power is turned off. Did not switch battery power quickly. If you encounter such a situation, you can connect a 1K discharge resistor in parallel to the 5V input port.
5. If you want to increase the battery capacity of the UPS module, you can use multiple cells in parallel, and other functions will not be affected.
Notice:
1. The real color of the item may be slightly different from the pictures shown on the website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data. Thank for your understanding.
3. 1cm=0.39''.
Package Included:
1x DC-DC Boost Module


* Please make payment asap, then we can arrange shipment for you asap.


- Thanks for your bid

* We will arrange shipping for you within 24 Hours after payment cleared except the holidays.

* If you have changed your address, or want us to ship to another address, please change to the new address.

* We ship items to Worldwide. Thank you. 



- International Buyers Please Note: 

*  Please check with your country customs office to determine what these additional costs will be prior to bidding/buying

* We will carefully test every item before shipment.The quality is guaranteed!



- Our working time:

* Hong Kong time : Monday to Saturday 8:30 am to 5:30 pm.
* if you send email to us,In our working hours will be resumed within 24 hours.
* If you we are not satisfied with us ,please contact me and don't give us negative or natural feedback,We must give you a satisfactory solution.




* You can contact us through email
 

On 13-Nov-2023 at 05:57:13 GMT, seller added the following information:

DataCaciques