Overview

This is a multi-function inverter/charger, combining functions of inverter,

MPPT solar charger and battery charger to offer uninterruptible power 

support with portable size. Its comprehensive LCD display offers 

user-configurable and easy-accessible button operation such as battery 

charging current, AC/solar charger priority, and acceptable input voltage 

based on different applications.

NOTE 1:This is a wide voltage Hybrid inverter. Solar panel input voltage 

must be higher 150V so that can start up the inverter to work.

and cannot be lower than 120V during use.

And each parallel model must use a set of PV boards separately to ensure 

that the voltage is greater than 150V (PV boards are recommended to be 

connected in series)

NOTE 2: This Hybrid Inverter supports the WIFI function,but need to buy the 

WIFI module connect to APP so that can monitor. 

NOTE 3: If choose with Parallel function model, the parallel kit already built 

in inside, don't need you to buy and install separately.

NOTE 4:The battery capacity of the correct matching system is determined 

according to the specific usage requirements of the load and application 

scenarios, otherwise it will easily lead to insufficient battery capacity or 

excessive waste of power generation. For details, please refer to the 

manual recommendation or consult online customer service.

 Features :

●5500W*2pc=11000W 230VAC 48V Battery Charger Hybrid Inverter
●Inverter running without battery
●Built-in MPPT 80A solar controller

●up to 3 units Parallel

1. Pure sine wave inverter
2. Built-in MPPT solar controller
3. Configurable input voltage range for home appliances and personal

computers via LCD setting

4. Configurable battery charging current based on applications via LCD setting

5. Configurable AC/Solar Charger priority via LCD setting

6. Compatible to mains voltage or generator power

7. Auto restart while AC is recovering

8. Overload/ Over temperature/ short circuit protection

9 Smart battery charger design for optimized battery performance

10 Cold start function

Basic System Architecture 

The following illustration shows basic application for this inverter/charger. 

It also includes following devices to have a complete running system:

Generator or Utility.

PV modules (option)

Consult with your system integrator for other possible system architectures 

depending on your requirements. 

This inverter can power all kinds of appliances in home or office environment, 

including motor-type appliances such as tube light, fan, refrigerator and air conditioner.

Specification:

INVERTER MODEL:1.5KVA  3.5KVA  5.5KVA

Input Voltage Waveform:Sinusoidal (utility or generator)

Nominal Input Voltage:230Vac

Low Loss Voltage:170Vac±7V (UPS);   90Vac±7V (Appliances)

Low Loss Return Voltage:180Vac±7V (UPS);   100Vac±7V (Appliances)

High Loss Voltage:280Vac±7V

High Loss Return Voltage:270Vac±7V

Max AC Input Voltage:300Vac

Nominal Input Frequency:50Hz / 60Hz (Auto detection)

Low Loss Frequency:40±1Hz

Low Loss Return Frequency:42±1Hz

High Loss Frequency:65±1Hz

High Loss Return Frequency:63±1Hz

Output Short Circuit Protection:

Line mode: Circuit Breaker

Battery mode: Electronic Circuits

Efficiency (Line Mode)

>95% ( Rated R load, battery full charged )

Parallel Capability: Yes, up to 3 units

Note: For more information on parallel function, split-phase 

and 3-phase, PLS contact us for a manual : )