100W 5A TYPE-C Decoy PD 2.0 3.0 QC4 QC5 to 5V 9V 12V 15V 20V DC Trigger Adapter Connection QC4 Charge Charging Notebook Module
Specifications:
Input protocol: PD2.0 or PD3.0
Trigger gear: 5V/9V/12V/15V/20V
Very low static power consumption 1.5mA
Static power consumption: less than 1.5mA in all gears
Output pads: 4 pitches of 2.54mm, square negative round positive
The output is connected to 20V by default. It is recommended to actually check the output voltage before use
If you set 15V, connect the four jumper pads on the front with 20V, and then connect the 15V jumper pads on the back
A PD decoy 5V 9V 12V 15V 20V fully supported, hardware jumper solder joints set the voltage, there is no wrong touch or poor contact or software crashes resulting in voltage errors
DIY by yourself, built into various devices that require 5-20V, set the voltage, compatible with PD power supply
The maximum 20V5A100W support, the specific output power depends on how much the charger supports the corresponding gear
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1-3cm differences due to manual measurement.
Package Included:
1x Adapter Module