More than 16 feet of RGB color change
LED lights light up your RV.
This is a fully waterproof RGB LED strip 16'. Each time the awning is opened and closed, the lights are long-lasting and do not need to be opened or closed, plugging and unplugging.
This kit is designed for recreational vehicles. Secure the strip in place with the adhesive 3M backing
What is included in the kit:
1x 16'Pc. 5050 waterproof LED strip with wire leads. This LED strip is RGB and can be switched from white, blue, green, red and any combination of 4 colors to create a large number of different color combinations.
1 x 24-key infrared wireless remote with color change and different blink and strobe modes. Change from cool color changes or fast and vibrating strobe effects.
(Power Cord not included )
how to install:
This strip can be installed in many places; the best place to install the LED awning light is under the Awning lip, which is attached to the side wall of the RV. This will allow the LED shade light to be hidden and protected by the awning when closed and exposed when the awning is in the open position. This is the most permanent, safest and easiest place to install a awning light. When the light is positioned on the side wall of the device, it produces better light and does not shine in your eyes when you sit under the awning.
Choose where you want to install the light and consider how you would like to get a 12 volt power supply for this light strip. We recommend starting the strip end near the RV power supply.
If possible, use a 3M adhesive accelerator to clean the mounting surface, if not just rubbing alcohol. Remove the 3M backing and install it along the end of the awning extrusion end. Please be careful and plan ahead.
Remove the 3M backing from the LED strip and apply.
Connect the ribbon light leads to any 12V Source and enjoy the new LED shade light for 50,000 hours.
Note: Any DIY can be done easily.
