|
 | | SYS-6027R-N3RFT+ | - SuperServer 6027R-N3RFT+ (Black)
|
| | |
| | CPU | - Dual Socket R (LGA 2011)
- Intel® Xeon® processor E5-2600
and E5-2600 v2 family†
(up to 135W TDP)
| | Note | † BIOS version 3.0 or above is required | | Cache | | | System Bus | |
| | |
| | Memory Capacity | - 24x 240-pin DDR3 DIMM sockets
- Up to 1.5TB DDR3 ECC LRDIMM
- Up to 768GB DDR3 ECC Registered memory (RDIMM)
- Up to 128GB DDR3 ECC Un-Buffered memory (UDIMM)
| | Memory Type | - 1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| | DIMM Sizes | - 32GB, 16GB, 8GB, 4GB, 2GB, 1GB
| | Memory Voltage | | | Error Detection | - Corrects single-bit errors
- Detects double-bit errors (using ECC memory)
|
| | |
| | Chipset | | | SAS | - SAS from C606
- RAID 0, 1, 10 support
| | SATA | - Via Cable for SATA controller
- SATA 2.0 3Gbps with RAID 0, 1, 5, 10
- SATA 3.0 6Gbps with RAID 0, 1
| | IPMI | - Support for Intelligent Platform Management Interface v.2.0
- IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
- Nuvoton WPCM450 BMC
| | Network Controllers | - Intel® X540 Dual Port 10GBase-T
- Intel® i350 Dual Port Gigabit Ethernet
- Virtual Machine Device Queues reduce I/O overhead
- Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
- 1x Realtek RTL8201N PHY (dedicated IPMI)
| | Graphics | |
| | |
| | Serial ATA | - 2x SATA 3.0 ports (6Gbps)
| | SAS | | | LAN | - 2x RJ45 10GBase-T ports
- 2x RJ45 Gigabit Ethernet LAN ports
- 1x RJ45 Dedicated IPMI LAN port
| | USB | - 7x USB 2.0 ports total
(2x rear + 4x via header + 1x Type A)
| | VGA | | | Serial Port / Header | - 1x Fast UART 16550 port / 1 Header
|
|  | | |
| | Form Factor | | | Model | |
| | |
| | Width | | | Height | | | Depth | | | Gross Weight | | | Available Colors | |
| | |
| | Buttons | - Power On/Off button
- System Reset button
| | LEDs | - Power status LED
- Hard drive activity LED
- 2x Network activity LEDs
- System Overheat LED
- Power fail LED
|
| | |
| | PCI-Express | - 1 PCI-E 3.0 (x16) Full-height (16.5" length)
- 1 PCI-E 3.0 (x16) Full-height (10" length)
- 1 PCI-E 3.0 (x8) Full-height (16.5" length)
- 1 PCI-E 3.0 (x8) Full-height (6.6" length)
- 2 PCI-E 3.0 (x8) Low-profile (6.6" length)
- UIO AOC Compatibility Matrix
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.)
|
| | |
| | Hot-swap | - 10x 3.5" Hot-swap SAS / SATA HDD trays (connected to onboard storage controller - 2x SATA3, 8x SAS)
|
| | |
| | DVD-ROM | - Slim DVD-ROM drive (optional)
|
| | |
| | 1x SAS2 / SATA backplane |
| | |
| | Fans | - 4x 8cm heavy duty PWM fans
|
| | |
| | 920W high-efficiency (94%+) AC-DC Redundant power supplies with PMBus and I2C | | AC Input | - 100-240 V, 50-60 Hz, 11-4.5 Amp
| | DC Output | - 4 Amp @ +5V standby
- 75 Amp @ +12V
| | Certification |   Platinum Certified
[ Test Report ] |
| | |
| | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| | BIOS Features | - Plug and Play (PnP)
- APM 1.2
- PCI 2.2
- ACPI 1.0 / 2.0
- USB Keyboard support
- SMBIOS 2.3
- UEFI
|
| | |
| RoHS
| | | Environmental Spec. | - Operating Temperature:
5°C to 35°C (41°F to 95°F) - Non-operating Temperature:
-40°C to 60°C (-40°F to 140°F) - Operating Relative Humidity:
8% to 90% (non-condensing) - Non-operating Relative Humidity:
5% to 95% (non-condensing)
|
|
