Multitool 2 x 36 inch Belt Grinder Attachment

The Multitool 2 x 36 belt grinding attachment is an upgrade for any bench grinder. This versatile tool removes material up to 5 times faster than with the equivalent grit grinding wheel. Belts change in seconds to grind, sand, deburr or polish. A variety of belts and discs are available for any project.

The Multitool has four different grinding surfaces to cover almost any grinding need. The most used surface is the front contact wheel which has a serrated surface to make grinding and deburring very controllable and smooth. The top platen can be used for straightening or profiling longer edges and the underside of the Multitool has a slack belt area for blending and finishing. Finally, the 7-inch disc on the side can be used with or without the optional miter table for beveling and profiling or final finishing.

Multitool fits most popular brands of grinders with screw-on type wheel guards with no special adapter required. The fitting kit contains a universal adapter with radial slots to suit the wheel guard mounting holes, and easy to follow instructions. (See documents tab for fitting template) Multitool will NOT fit a grinder with heavy cast wheel guards if the guards are used to retain the spindle bearings. We recommend a quality 1/2 hp grinder as a minimum with 3/4 or 1 hp preferred. If you'd like to use heavy backing belts such as 3M Scotch-Brite, a 1 hp motor is required. Shaft size must be 1/2 inch or 5/8 inch. With a standard 3,450 RPM grinder belt speed is approximately 4,970 surface feet per minute.

 NOTE: Normally a stocked item, if not, lead times may exist. Feel free to contact us for availability.

Visit our website to see our full line of metal fabrication equipment!