Use of eyelash complex:

1. Pre-prepare the eyelashes for the procedure by cleansing them with a foam that does not contain oils, as well as a degreasing agent that does not contain alcohol.

2. The next stage of the procedure is the selection of curlers, depending on the wishes of the client.

Curlers need to be glued to the eyelid using Lendi "Fixing Glue Lash" glue. After fixing the curler on the eyelid, apply Lendi "Fixing Glue Lash" in small areas to the curler to glue the lashes. For easy and quick laying, use the Lendi multifunctional tool and applicator.

3. An important stage of the procedure is the diagnosis of eyelashes:

* 1st group - thick and straight eyelashes 10-13 min;

* 2nd group - eyelashes of medium density 6-10 min.

Apply composition No. 1 to the zone of curl formation, leaving a distance of 1-2 mm from the root of the eyelashes, hold for the required time according to the density of the eyelashes.

The components that are part of No. 1 open the scales, thanks to which they easily penetrate into the middle of the eyelash, affecting the disulfide bonds that are responsible for the direction of eyelash growth.

At the end of the exposure time, remove the remains with a cotton pad or a cotton swab.

4. Apply composition No. 2 to the zone of curl formation, on which composition No. 1 was previously applied. The amount of composition #2 that you use during the lamination procedure should correspond to the amount of composition #1 that was used at the previous stage. The function of composition No. 2 is the neutralization of composition No. 1 and the formation of new disulfide bonds, in relation to how the master modeled the eyelashes on the curler.

The exposure time of composition No. 2 is equal to the exposure time of composition No. 1.

5. At the end of the exposure time, remove the remains with a cotton pad or cotton swab.

To achieve the most vivid effect, it is recommended to carry out the procedure of dyeing eyelashes with the use of paint that works together with a low-percentage oxidizer. Do not dye with henna and do not lighten eyebrows and eyelashes after the lamination procedure. Keep the paint for the recommended time, then remove it with a cotton swab or disc moistened with water.

6. To complete the procedure and achieve the maximum result, apply and hold composition No. 3 for 2-3 minutes. The components of composition No. 3 maximally moisturize and restore the eyelash structure, as well as fix the obtained result. Does not require rinsing.

Use of the eyebrow lamination complex:

1. Pre-prepare the eyebrows for the procedure by cleaning them with a foam that does not contain oils.

2. An important stage of the procedure is the diagnosis of eyebrow hair:

* 1st group - thick eyebrow hair 10-13 min;

* 2nd group - eyebrow hair of medium density 6-10 min.

3. Apply composition No. 1 to the hair and distribute it evenly over the entire surface of the eyebrow. To enhance the effect of the product, cover the surface of the eyebrow area with a special film and leave the composition for the required time, according to the density of the eyebrow hair. At the end of the exposure time, remove the film and apply the eyebrows with a brush in the desired direction. If the eyebrow hair has not become flexible and soft enough, you can re-cover with a film.

IMPORTANTLY! The maximum exposure time of the composition should not exceed the exposure time for the selected group of eyebrow hair. After the exposure time is over, remove the remains of the composition with a cotton pad or a cotton swab.

4. Apply composition No. 2 to the hair of the eyebrows and distribute evenly over the entire surface of the eyebrows. The amount of composition #2 that you use during the lamination procedure should correspond to the amount of composition #1 that was used at the previous stage. At this stage, you need to take into account the direction of eyebrow hair growth. Changes should be smooth to avoid kinks and hair damage.

5. At the end of the exposure time, remove the remains with a cotton pad or cotton swab. To achieve the most vivid effect, it is recommended to carry out the eyebrow dyeing procedure using paint that works together with an oxidizer. It should be taken into account that the dyeing reaction during lamination is faster and the color on the hair will be brighter, while on the skin it is the opposite. Do not paint with henna and do not lighten the eyebrows after the lamination procedure. Keep the paint for the recommended time, then remove it with a cotton swab or disc moistened with water.

6. To complete the procedure, as well as to achieve the maximum result, or after lamination, without taking into account coloring, apply and hold composition No. 3 for 2-3 minutes. The components of composition No. 3 maximally moisturize and restore the eyelash structure, as well as fix the obtained result. Does not require rinsing.

Storage:

Lift #1

Composition/Ingredients: Aqua, Thioglycolic Acid, Ammonium Hydroxide, Cetearyl Alcohol, Propylene Glycol, Paraffinum Liquidum, Cetrimonium Chloride, Ethanolamine, Sodium Sulfite, Sodium Erythorbate, Ceteareth-20, Diazolidinyl Urea (and) Methylparaben (and) Propylparaben, Disodium EDTA, Hydrolyzed Keratin, Linalool, Limonene, Geraniol, Citronellol

The hydrogen index (pH) is in the range of 9.0-9.4

Lock #2

Composition/Ingredients: Aqua, Cetearyl Alcohol, Hydrogen Peroxide, Cetrimonium Chloride, Ceteareth-20, Ethylhexyl Stearate, Paraffinum Liquidum, Disodium EDTA, Tetrasodium Pyrophosphate, Sodium Stannate, Phosphoric Acid

The hydrogen index (pH) is 2.5-3.5

Look #3

Composition/Ingredients: Aqua, Glycerin, Polysorbate 20, Xanthan Gum, Phenoxyethanol (and) Ethylhexylglycerin, Hydroxypropyl Gluconamide (and) Hydroxypropylammonium Gluconate, Panthenol, Hydrolyzed Keratin, Lactic Acid, CI 19140, Acid Violet 43

The hydrogen index (pH) is 4.5-5.5

Precautions: The first composition contains thioglycolate and ammonia! The second composition contains hydrogen peroxide! Follow the instructions. Avoid contact with eyes. In case of contact with eyes, immediately wash them with plenty of water and consult a doctor. Use protective gloves. Before use, it is necessary to conduct a test to detect allergic reactions. Do not use in case of skin inflammation and allergic reactions. In case of an allergic reaction, consult a doctor. Do not use metal objects when working with this composition

Use by the date indicated on the package. Date of manufacture: 24 months before the end date of use. Use within 6 months after opening the original package. Batch number: see on the bottle

Storage conditions: store in a dry place inaccessible to children at a temperature from +5°С to +25°С. Avoid direct sunlight.