Description
CH341A USB Programmer BIOS Programmer Flasher Kit with Test Clip Adapter for 24 25 Series Chips
Download Driver:
Link for http://www.wch.cn/download/CH341SER_EXE.html
Product Introduction:
1. CH341A Programmer
- Support parallel port: support the parallel port of USB printers, EPP and MEM
- Support serial port: support USB to UART, I2C and SP interfaces
- Output voltage: The output voltage signal level can be selected: 3.3V or 5V
- On-board power indicator, reading-writing indicator and on-board 506MA resettable fuse
Features:
- Support series 24 and 25 chips (read the lists below)
- Support USB to TTL online flashing (if you need a cable for Dupont, please purchase separately)
- The board with SPI pin corresponding to MSI JSP11 interface (special cable should be purchased separately)
- Support MCU (for STC) online program downloading (if you need a cable for Dupont, please purchase separately)
- Provide 5V and 3.3V power output. Support all popular operating systems for WINDOWS, including 32-bit and 64-bit systems
- Designed with 506MA resettable fuse
- Support 24EEROM
- Stable CH341A chip
- It supports 25 SPI FLSAH
- Support MCU program downloading
- Support online flashing
2. SOP Test Clip with Cable & Adapter Board:
- It supports chips with 1.27mm pitch, i.e. full series of SOP8 wide and SOP narrow to DIP-8.
- It is suitable for SOP8 chips in 200MIL packages and SOP8 chips in narrow 150MIL packages.
How to use:
Clamp a chip with the clip, and add a voltage of 3.3V to the clip pin corresponding to the 8th pin of the chip. Generally, the 3.3V power supply has two wires, then VCC corresponds to the clip, and the other wire is directly grounded.
Attention:
When using a clip to clamp a chip, do not force it down. Open the clamp, and clamp the chip from the left and right sides of the chip. When removing the chip, you can't pull it out directly, you must first separate the clip from the left and right, and then take out the clip. In this way, the operation will basically not damage the tip of the clamp. When encountering a programmer with a protected function, the clip cannot be used at normal voltage, and a voltage of 3.3V needs to be added at this moment.
Package Included:
- 1 x Programmer
- 1 x SOP8 Test Clip with Cable
- 1 x 8Pin to 16Pin Adapter Board
- 1 x Green Board
- 2 x 4P Pin Headers
Download Driver:
Link for http://www.wch.cn/download/CH341SER_EXE.html
Product Introduction:
1. CH341A Programmer
- Support parallel port: support the parallel port of USB printers, EPP and MEM
- Support serial port: support USB to UART, I2C and SP interfaces
- Output voltage: The output voltage signal level can be selected: 3.3V or 5V
- On-board power indicator, reading-writing indicator and on-board 506MA resettable fuse
Features:
- Support series 24 and 25 chips (read the lists below)
- Support USB to TTL online flashing (if you need a cable for Dupont, please purchase separately)
- The board with SPI pin corresponding to MSI JSP11 interface (special cable should be purchased separately)
- Support MCU (for STC) online program downloading (if you need a cable for Dupont, please purchase separately)
- Provide 5V and 3.3V power output. Support all popular operating systems for WINDOWS, including 32-bit and 64-bit systems
- Designed with 506MA resettable fuse
- Support 24EEROM
- Stable CH341A chip
- It supports 25 SPI FLSAH
- Support MCU program downloading
- Support online flashing
2. SOP Test Clip with Cable & Adapter Board:
- It supports chips with 1.27mm pitch, i.e. full series of SOP8 wide and SOP narrow to DIP-8.
- It is suitable for SOP8 chips in 200MIL packages and SOP8 chips in narrow 150MIL packages.
How to use:
Clamp a chip with the clip, and add a voltage of 3.3V to the clip pin corresponding to the 8th pin of the chip. Generally, the 3.3V power supply has two wires, then VCC corresponds to the clip, and the other wire is directly grounded.
Attention:
When using a clip to clamp a chip, do not force it down. Open the clamp, and clamp the chip from the left and right sides of the chip. When removing the chip, you can't pull it out directly, you must first separate the clip from the left and right, and then take out the clip. In this way, the operation will basically not damage the tip of the clamp. When encountering a programmer with a protected function, the clip cannot be used at normal voltage, and a voltage of 3.3V needs to be added at this moment.
Package Included:
- 1 x Programmer
- 1 x SOP8 Test Clip with Cable
- 1 x 8Pin to 16Pin Adapter Board
- 1 x Green Board
- 2 x 4P Pin Headers
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.