• Product Description:
  •  Steering gear,also called steering gear, is the most important part of automobile steering system.
  •  
  • Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.
  •  
  • Power steering rack and pinion is the most important part for vehicle swerving and security assurance.
  •  
  • It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,
  •  
  • thus making it easier to turn the wheels.
  •  
  • Other Part Number: 26-2611 ; Rack 25507
  •  
  •  
  • Tech Info:
  •  

    • 26-2611 Steering Rack For 1999-2003 Lexus Rx300 2000 2001 2002 Cardone 26-2611

    Product Description:


    Steering gear,also called steering gear, is the most important part of automobile steering system.

     

    Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.

     

    Power steering rack and pinion is the most important part for vehicle swerving and security assurance.

     

    It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,

     

    thus making it easier to turn the wheels.

     

    Other Part Number: 26-2611 ; Rack 25507

     

     

    Tech Info:

     

    Grade Type : Performance
    Bellows Color : Black
    Gasket or Seal Included : No
    Outlet Line Fitting Gender : Female
    Inlet Line Fitting Gender : Female
    Inlet Line Fitting Diameter : 0.630
    Mounting Brackets Included : No
    Outlet Line Fitting Diameter : 0.669
    End To End Length : 46.50
    Outer Tie Rods Included : No
    Total Turns Lock To Lock : 3
    Mounting Hardware Included : No
    Mount Hole Quantity : 2
    New Or Remanufactured Remanufactured

     

    Compatible with the following vehicles:

     

    Notes Year Make Model Trim Engine


      2003 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated


      2002 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated


      2001 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated


      2000 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated


      1999 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated

     

     

    Note: 

     

    In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.


    note:


    1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred.

     

    2. Turn the steering wheel to the straight ahead position.


    3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.


    4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.


    5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear.

     

    6. Install the steering gear on the mounting base and tighten the fixing bolts.

     

    7. Universal joint or coupling between mounting column and steering gear.


    8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed.

     

    9. Keep the steering wheel in straight ahead position.


    10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit)


    Item Specifics
    Brand super_garage
    Manufacturer Part Number G16546401S
    Type Steering Gear,Steering Gear Body,Steering Rack,Rack & Pinion
    Performance Part Yes
    Installation method Performance/Custom
    Transmission Type Automatic
    Material High Quality Steel
    Surface Finish Polished, Rust Protected
    Manufacturer Warranty 3 Years
    Vintage Car Part Yes
    Fitment Type Direct Replacement
    Rack Type Hydraulic
    Greasable or Sealed YES
    Other Part Number Steering gear
    Rack Material corrosion and rust prevention
    Note Backed by satisfying after-sales service
    Advantage Rotate quickly and normal position
    Interchange Part Number 26-2611,Rack 25507,36R0929,19321027
    Superseded Part Number 4550349095,4425048021,4425048041
    OE/OEM Part Number rack replacement kit,rack and pinion,power rack parts
    OE Number Power Steering Rack,Steering Rack and Pinion
    Sub Type Rack and Pinion Assembly, Rack and Pinion Rack Gear
    Package Dust plug
    Universal Fitment No
    Itment Note Top performance For long service life
    Mounting Hardware Included As the picture
    Fits 1999-2003 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC
    For 2002 Lexus RX300 Base Sport Utility 4-Door 3.0L

    Payment

    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
     

    1.We only accept PayPal.

    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 10 days as auction ended or order might be delayed.

    Shipping

    1. Orders processed within 24 hours of payment verification.

    2. The images shown are not the actual item and are for your reference only.

    3. Fast shipping:All our packages use USPS First Class/UPS/Fedex.... Package Service

    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

     

    Returns

    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

     

    Contact Us

    Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any question or concern, please contact us via ebay message.If you don't get response within 1-2 business days, please check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my emails

    Feedback

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.

    26-2611 Steering Rack For 1999-2003 Lexus Rx300 2000 2001 2002 Cardone 26-2611

    Product Description:


    Steering gear,also called steering gear, is the most important part of automobile steering system.

     

    Power steering (PAS) or steering assist system helps drivers steer by augmenting steering effort of the steering wheel.

     

    Power steering rack and pinion is the most important part for vehicle swerving and security assurance.

     

    It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels and provides a gear reduction,

     

    thus making it easier to turn the wheels.

     

    Other Part Number: 26-2611 ; Rack 25507

     

     

    Tech Info:

     

    Grade Type : Performance
    Bellows Color : Black
    Gasket or Seal Included : No
    Outlet Line Fitting Gender : Female
    Inlet Line Fitting Gender : Female
    Inlet Line Fitting Diameter : 0.630
    Mounting Brackets Included : No
    Outlet Line Fitting Diameter : 0.669
    End To End Length : 46.50
    Outer Tie Rods Included : No
    Total Turns Lock To Lock : 3
    Mounting Hardware Included : No
    Mount Hole Quantity : 2
    New Or Remanufactured Remanufactured

     

    Compatible with the following vehicles:

     

    Notes Year Make Model Trim Engine


      2003 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated


      2002 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated


      2001 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated


      2000 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated


      1999 Lexus RX300 Base Sport Utility 4-Door 3.0L 2995CC V6 GAS DOHC Naturally Aspirated

     

     

    Note: 

     

    In order to ensure the normal operation of the steering gear, relevant parts shall be cleaned as much as possible before installation.


    note:


    1.In order to avoid the fault caused by the dirt entering the steering oil circuit, the plug on each oil port of steering pump of steering gear shall be opened before connecting the oil pipe, and the oil pipe and plug shall be carefully cleaned and deburred.

     

    2. Turn the steering wheel to the straight ahead position.


    3. Clean the mounting bracket of the steering gear and relevant mating surfaces of the steering gear.


    4. For the adjustable steering column, use a suitable rope to pass through the space of the cross fork of the steering shaft, hang the steering shaft, and connect the steering shaft and the input shaft of the steering gear.


    5. Turn the steering gear to the middle position to align the relevant marks at the input end and output end of the steering gear.

     

    6. Install the steering gear on the mounting base and tighten the fixing bolts.

     

    7. Universal joint or coupling between mounting column and steering gear.


    8. For the adjustable steering column, the upper end seal of the steering gear shall not be damaged when the universal joint is installed.

     

    9. Keep the steering wheel in straight ahead position.


    10. Put the pitman arm on the steering gear to align the two marks. 10. Tighten the locknut according to the specified torque and rivet (anti loose pit)



    WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
     

    1.We only accept PayPal.

    2.Please do not use the PayPal note field to indicate us to ship to other address. The note there will NOT be read. If you want to change the shipping address, please contact us by eBay messages.

    3.(if you want cancel orders or change address pls contact us within 6 hours after payment,or we are not responsible for shipping a replacement.)

    4.Payment must be received within 10 days as auction ended or order might be delayed.

    1. Orders processed within 24 hours of payment verification.

    2. The images shown are not the actual item and are for your reference only.

    3. Fast shipping:All our packages use USPS First Class/UPS/Fedex.... Package Service

    4. If you have not received your shipment within 15 days from payment , please contact us. We will track the shipment and get back to you as soon as possible with a reply. Our goal is customer satisfaction!

     

    1. You have 30 days to contact us and 10 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and we will not issue you a refund or replacement. There are NO EXCEPTIONS!

    2. All returned items must be in the original packaging and you must provide us with the shipping tracking number, specific reason for the return, and item custom lable.

    3. We will refund your full winning bid amount, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER both Buyer and Seller cancel the transaction from eBay. OR, you may choose to have a replacement.

     

    Customer satisfaction is very important to us and our feedback rating reflects this satisfaction. If you have any question or concern, please contact us via ebay message.If you don't get response within 1-2 business days, please check your eBay email or My Messages in case your email provider has an overly-aggressive spam filter blocking eBay or my emails

    We maintain high standards of excellence (five stars review)and strive for 100% customer satisfaction! FEEDBACK IS VERY IMPORTANT TO US. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns.


    All rights reserved.
    Shop Category
     Store Home
     For Acura
     For Buick
     For Chevrolet
     For Chrysler
     For Cadillac
     For Ford
     For Pontiac
     For Saturn
     For Toyota
     For Dodge
     For Honda
     For Hyundai
     For Jeep
     For Nissan
     For Volkswagen
     Universal Fitment
     For Mitsubishi
     Driveshaft
     Steering Rack
     Starter
     Alternator
     Engine Mount
     Sensor
     Other
    Hot Item
    Picture

    content_src_url

    New List Item
    Help & Info
    Payment Policy
    Shipping Policy
    Return Policy
    FAQ
    About Us