Application

It can be widely used in waterproof fabric, tents, raincoats, down jackets, ski clothes, mountaineering clothes, diving clothes, navigation services, PVC, PU, PACoating fabric, snow boots, gloves, fire balloons, advertising clothing, uniforms, uniforms, uniforms, and other special forces field a variety of fabrics and garments and a cross straight bit water pressure test.

How to Use

1. Remove any dirt from between the upper and lower pressure plates of the rubber ring before testing.

2. Loosen the airbag knob switch to the open position.

3. Fill the lower platen drain valve with an appropriate amount of clean water.

4. Place the test object between the upper and lower platens.

5. Then tighten the airbag knob switch to OFF and turn the handwheel to lower the upper platen until the upper and lower platens are completely sealed.

6. Repeatedly compress the airbag with the hand and observe the pressure gauge pointer at the specified value. Observe whether there is any abnormality on the surface of the test object while pressurizing. If not, continue to compress the hand-held air wrap until the pointer does not move, and then close the manual switch to observe the change in the pointer at this time. If the pointer does not fall back to change, the water pressure value is this value. If there is a fallback, after waiting for the pointer to stabilize to obtain the maximum water pressure value of the object to be tested When in the compression of the handheld air package found that the surface of the test object has the phenomenon of water seepage as well as the pressure gauge pointer does not go up, indicating that the test object water pressure is lower than the current pointer indication value.

Specification

Model: YJ-1200

Color: Blue

Material: 45# Steel, Aircraft Aluminium

Surface Treatment: High-temperature Baking, Anodising

Executive Standard: In Line with gb4744-84, But also in Line with iso-811

Measuring Range: Plastic Bags, Clothes, Tents, Raincoats, Cloth, etc.

Technical Parameters: The Sample Level is Placed, Under the Pressure of the Sample

Pressure Area: 100cm², d=11.28cm

Water Column Height: 0 - 10000mmH2O

Rising Speed: 10 ± 3mmH2O (Standard Rate) 60 + 20 mmH2O

Standard Rate: 100 ± 30 mmH2O (Increase Rate)

Sensitivity: 1mmH2O, Maximum Display Value 9999.9mmH2O

Gross Weight: 6kg/13.23lbs

Product Size: 17.2*25.2*28cm/6.77*9.92*11.02inch

Package Size: 30*40*38cm/11.81*15.75*14.96inch

Package Included

1* Waterproof Testing Machine

1* Water Pot

1* Pressurised Accessory

1* English Manual