Swim Spa Cover Lifter Cabinet Mount

 

Cabinet mount cover lifter for swim spas features

• Easy one-person operation; easy to install
• Extend the life of your Spa Cover
• Transfer the weight from the cover’s weakest area to the strongest area
• Rugged, durable and weather-resistant
• Fits most swim spas and some portable spas*
• For a spa with 4 cover panels, you will need two cover lifters.

 

* This lifter will only work on swim spa covers that have a hinge (Material that joins the cover panels) on the cover.This lifter should only be installed on spas that have structural support behind the cabinet panels

If in doubt, please contact us.

 

Notes about using a cover lifter with a swim spa cover

• If used on a Vortex Aqualap or Hydrozone swim spa, this cover lifter can only lift the hinged panels.
• In the case of a Palladium or Titanium spa cover, the lifter will only lift 2 of the three cover panels.
• Additional panels will need to be removed by hand.
• In the case of an Aqualap or Hydrozone, you can install one cover lifter at each end of your swim spa. The 2 lifters can only lift 4 (2 at each end) of the 6 cover panels. The 2 centre cover panels will need to be removed by hand.
• Installation of the bracket should be no higher than 100mm below the spa shell lip
• Clearance needed is 600mm on the side where the cover will stand and 200mm on two other sides

 

NOTICE: Equipotential Bonding Compliance Obligation

This product is subject to Equipotential Bonding compliance in accordance with the Australian and New Zealand Standards (AS/NZS 3000: 2018 Electrical Installations) otherwise known as the Wiring Rules. 

If this product is installed within 1.25m of a body of water including spa, swim spa or pool, then Equipotential Bonding MUST be performed by a licensed electrical person prior to the product being used. This is a mandatory requirement. As the purchaser of this product, you are responsible for ensuring compliance with this requirement at your own expense. 

Swim Spa Cover Lifter Cabinet Mount Cabinet mount cover lifter for swim spas features Easy one-person operation; easy to install Extend the life of your Spa Cover Transfer the weight from the cover’s weakest area to the strongest area Rugged, durable and weather-resistant Fits most swim spas and some portable spas* For a spa with 4 cover panels, you will need two cover lifters. * This lifter will only work on swim spa covers that have a hinge (Material that joins the cover panels) on the cover.This lifter should only be installed on spas that have structural support behind the cabinet panels If in doubt, please contact us. Notes about using a cover lifter with a swim spa cover If used on a Vortex Aqualap or Hydrozone swim spa, this cover l