Description
5KW/5000W Induction Heater Tool Induction Heating Machine with Motherboard Heating Coil Water Pump
Description:
It is a low-power induction heating machine with a DC48V power supply and a maximum current of 100A and a power of 5000W. It is mainly used for heating and quenching of small ferrous metal materials. It can be used with our 70mL or 150mL graphite crucibles up to 1600°C. It easily melts metals such as iron, copper, gold, silver, aluminum, etc.
Features:
- Adopt 2mm PCB and 2OZ copper thickness, featuring large current, good heat dissipation
- 4pcs 9025 high power cooling fan
- Heating coil is wrapped with high temperature resistant insulating material to prevent short circuit during heating. Special customized heating coil is used
- Its input terminal uses high-current power terminals, which can be connected to a 100A power meter
- The heating coil is cooled by a water pump
Parameters:
1. Motherboard: 256 x 210 x 115mm/10.1 x 8.3 x 4.5"
2. Heating coil: 60 x 70 x 73mm/2.4 x 2.8 x 2.9" or 70 x 80 x 73mm/2.8 x 3.1 x 2.9" (Inner Diameter* Outer Diameter*H)
3. Input voltage: DC48V
4. Maximum power: 5000W
5. Maximum DC working current: 100A
6. Metal (iron) can be heated to above 1000â
7. The maximum operating temperature of the crucible: 1600â
Package Included:
- 1 x Motherboard
- 1 x Heating Coil
- 1 x Water Pump
- 2 x DC 12V 2A Power Adapters
- 1 x Water Pump Hose
Precautions:
1. If you use your own power supply, please ensure that the power supply can stably output a current of more than 100A. In general, use two 50A communication power supplies in parallel.
2. Power on/off sequence: first supply power to the power supply, wait a few seconds for the power supply to output stably, then turn on the power supply between the power supply and the motherboard (it is recommended to use a 100A air switch), and finally press the switch button next to the green interface. Please make sure to do it correctly, because wrong operation will burn out the motherboard (without special protection). When shutting down, first turn off the switch button, then turn off the air switch between the motherboard and the power supply, and finally turn off the power switch.
3. The equipment must work with water cooling and air cooling at the same time. If any of them do not work, you should disconnect the power immediately and contact us for solutions.
4. When conditions permit, it is recommended to use the mode of cold water entering and hot water being discharged directly, rather than the circulation method, ensuring better heat dissipation effect.
5. For users who use crucibles for a long time, please prepare more crucibles, because when graphite is heated at high temperature, it will react with oxygen to generate carbon dioxide and gradually consume the crucibles.
6. Always pay attention to the changes of various parameters of display screen, especially the voltage and current and the temperature of the motherboard. Once an abnormality is found, the power supply must be disconnected immediately.
7. When using a graphite crucible, a non-circulating water cooling method must be used (input cold water and discharge hot water into the sewer) to prevent the long-term high water temperature from affecting the service life (this water-cooling method is also recommended for long-term high-power operation ). After heating, the 12V auxiliary power supply must not be disconnected unless the crucible is taken out from the heating coil, otherwise the water pump will stop working and the heating coil will be burned out by the temperature of the crucible.
Description:
It is a low-power induction heating machine with a DC48V power supply and a maximum current of 100A and a power of 5000W. It is mainly used for heating and quenching of small ferrous metal materials. It can be used with our 70mL or 150mL graphite crucibles up to 1600°C. It easily melts metals such as iron, copper, gold, silver, aluminum, etc.
Features:
- Adopt 2mm PCB and 2OZ copper thickness, featuring large current, good heat dissipation
- 4pcs 9025 high power cooling fan
- Heating coil is wrapped with high temperature resistant insulating material to prevent short circuit during heating. Special customized heating coil is used
- Its input terminal uses high-current power terminals, which can be connected to a 100A power meter
- The heating coil is cooled by a water pump
Parameters:
1. Motherboard: 256 x 210 x 115mm/10.1 x 8.3 x 4.5"
2. Heating coil: 60 x 70 x 73mm/2.4 x 2.8 x 2.9" or 70 x 80 x 73mm/2.8 x 3.1 x 2.9" (Inner Diameter* Outer Diameter*H)
3. Input voltage: DC48V
4. Maximum power: 5000W
5. Maximum DC working current: 100A
6. Metal (iron) can be heated to above 1000â
7. The maximum operating temperature of the crucible: 1600â
Package Included:
- 1 x Motherboard
- 1 x Heating Coil
- 1 x Water Pump
- 2 x DC 12V 2A Power Adapters
- 1 x Water Pump Hose
Precautions:
1. If you use your own power supply, please ensure that the power supply can stably output a current of more than 100A. In general, use two 50A communication power supplies in parallel.
2. Power on/off sequence: first supply power to the power supply, wait a few seconds for the power supply to output stably, then turn on the power supply between the power supply and the motherboard (it is recommended to use a 100A air switch), and finally press the switch button next to the green interface. Please make sure to do it correctly, because wrong operation will burn out the motherboard (without special protection). When shutting down, first turn off the switch button, then turn off the air switch between the motherboard and the power supply, and finally turn off the power switch.
3. The equipment must work with water cooling and air cooling at the same time. If any of them do not work, you should disconnect the power immediately and contact us for solutions.
4. When conditions permit, it is recommended to use the mode of cold water entering and hot water being discharged directly, rather than the circulation method, ensuring better heat dissipation effect.
5. For users who use crucibles for a long time, please prepare more crucibles, because when graphite is heated at high temperature, it will react with oxygen to generate carbon dioxide and gradually consume the crucibles.
6. Always pay attention to the changes of various parameters of display screen, especially the voltage and current and the temperature of the motherboard. Once an abnormality is found, the power supply must be disconnected immediately.
7. When using a graphite crucible, a non-circulating water cooling method must be used (input cold water and discharge hot water into the sewer) to prevent the long-term high water temperature from affecting the service life (this water-cooling method is also recommended for long-term high-power operation ). After heating, the 12V auxiliary power supply must not be disconnected unless the crucible is taken out from the heating coil, otherwise the water pump will stop working and the heating coil will be burned out by the temperature of the crucible.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.