Note: Receive the screen according to the instructions to test first, no abnormality before loading.
Preparation before replacement
Switch off the phone and remove the SIM card tray. Disconnecting the power helps to avoid short circuit.
2. Precautions for replacing the mobile phone screen assembly
*Remove the screws: Pay attention to the length and position of the screws, and avoid losing them when placing them.
*Remove
the motherboard screws: The motherboard screws are different from other
screws and slightly smaller than other screws. Incorrect installation
of the screws will result in damage to the display. It will lead to
white spots on the screen.
Features
*Excellent colour/brightness and sensitive touch response
*Repair or replace old cracked damaged faulty LCD touch screen.
*We will test them one by one to make sure they work properly
*Makes your device look fresher than ever before
*Fully fit for use
Pre-Installation Precautions
1.Before
installing the screen, please remove the battery to allow the machine
to go to sleep, this will ensure that data will be written to the new
screen.
2.Please be careful to press the screen when installing, the
screen is very fragile, do not remove the protective film during
installation. Do not tear the film after receiving the screen, first
turn off the phone to connect the cable to test, test normal before
installing, the installation default has been tested!
3 If you can
not display, please contact us at the first time. And please do not tear
the film and installation screws to the product.
If the installation process leads to screen damage, we will not assume any responsibility.
4.
Before installation, please clean the flexible cable with alcohol and
make sure it is well connected before testing the screen to see if it
works properly.
5. During the installation process, please do not
pull the flexible cable, otherwise it will lead to black screen,
blurring or unable to display.
6. If this is your first time trying
to install the screen, we recommend that you ask a professional
technician to help you install the screen.
7.Please do not bend the cable excessively, bending more than 90 degrees may result in no display.