Welcome to Knightshousestore

We are a conpany with more than 10 years ecperience in the priduction of motorcycle accessoruies manufacturers. Our GFYSHIP brand has a high popularity and evaluation.

If you have any product you want. Please contact us and we will help you find it. We also have our own factory. You can customize the products you need. We will bring you satisfied with the service cheap price waiting for you.
   

Product Description

Choose Product Type:  

Top Kit

You'll want the Bottom Kit if: There's a heated grip wire that comes out the top half of your rubber grip flange. There are no other interferences. The majority of motorcycles will be able to use the Bottom Kit.


Note:

If you don't know which type of product your motorcycle is suitable for, please contact our online customer service before submitting an order.
The chrome grip flange must be removed before mounting the Throttle Lock. Top Kit can be used after chrome grip flange is removed. Bottom Kit may interfere with use of indicator button on housing.

Friction Pads are required. 

The GFYSHIP Throttle Lock was designed to be used with friction pads. Friction pads can last anywhere from 3,000 miles to 40,000+ miles. The wear depends on how often you rotate the throttle while it is engaged and if your throttle housings has sharp edges that rub on the friction pad. 

Which friction pad should you use? 

The friction pads come in 3 different thicknesses. Your kit comes with ONE of each size but you will only need to apply one pad to your Throttle Lock. You will want to start with the thickest friction pad and see if it fits between the throttle housing and the Throttle Lock Stopper Arm. If it doesn't fit, try the next size down until you find the right size that does not make contact with the throttle housing when disengaged. 

Where should I place my friction pad? 

We recommend adhering the friction pad along the top edge of the Stopper Arm, but, for some motorcycles, this isn't the best solution. If your throttle housing has any bevels on it which will interfere with the friction pad during any part of the rotation, then you will want to adjust the placement of the friction pad to avoid those bevels. Sometimes this means placing the friction pad a few millimeters away from the top edge of the stopper arm, or maybe placing it to the far right or left on the stopper arm. 

Fitment: 
For Honda Most Models
For Kawasaki Most Models
For Suzuki Most Models
For Yamaha  Most Models
For BMW Most Models
For Ducati Most Models
For Harley Most Models
For Triumph Most Models
For MV Agusta Most Models
For Aprilia Most Models
For Buell Most Models
For Benelli Most Models
For Kymco Most Models
For Can-Am Most Models
For Hanway Most Models
For Husqvarna Most Models
For Norton Most Models
For Kymco Most Models
For Hyosung Most Models
For FB Mondial Most Models
For Horex Most Models
For Most Models motorcycle

Top Kit: