The interface works with the appropriate software and enables:
Reading and erasing OBD-II errors
Clearing the CHECK ENGINE light
Read pending fault codes when the MIL is not yet on
Reading the error codes recorded that caused the MIL to light up
Reading of manufacturer's general and specific error codes
Freeze Frames Preview - FREEZE FRAMES
Monitoring of engine operating parameters in real time - LIVE DATA
Real-time reading of parameters
Checking the meaning of error codes
Engine power measurement (HP)
Measurement of parameters such as time from 0-100 km/h
DPF information for OPEL cars, using the OPL DPF - Android application; (Opel Insignia, Astra J, Chevrolet, with A20DT, A20DTH, A20DTJ, A20DTR, A20DTC, A20DTL and some A17DTx engines)
Information about DPF for VW group cars, using the VAG DPF - Android application; (engine supported: DETA, CRBC, CFHD, CUNA, CFFB, CFWA, CLHA, CXXB, CAYC, CAHA, CXHA, CFGB(*), CFGC, CJCA, CRMB, CUPA, CUSA, CXFA, CAYB, CAYD, CRLB, CUTA , CFHC, CAGA (*), CSHA, CJCD, DFSB, CLAB, DFLA, DCXA, CFCA, CGLC, CFJB, CFHA, CRUA, DDYA, DFFA, CRKB, DCYA, DFCA, CUUB, CGLB, CUAA, CUSB, CAPA ( *), DFGA, DFSF, DFHA, CNHA, DGTE (*), CCWA, DGDA, DLUB, CJCB, DGTD, CDUD, CSUD (*) = partial support or depending on software version
Supported protocols:
1. SAE J1850 PWM (41.6Kbaud)
2. SAE J1850 VPW (10.4Kbaud)
3. ISO9141-2 (5 initial bytes, 10.4Kbaud)
4. ISO14230-4 KWP (5 bit, 10.4 Kbaud)
5. ISO14230-4 KWP (fast init, 10.4 Kbaud)
6. ISO15765-4 CAN (11-bit ID, 500 Kbaud)
7. ISO15765-4 CAN (29-bit ID, 500 Kbaud)
8. ISO15765-4 CAN (11-bit ID, 250 Kbaud)
9. ISO15765-4 CAN (29-bit identifier, 250 Kbaud)
A.SAE J1939 CAN (29 bit ID, 250*Kbaud)
B.USER1 CAN (11*bit ID, 125*Kbaud)
C.USER2 CAN (11 * bit ID, 50 * kbaud)
❌ The interface does not connect with safety modules such as airbags, ABS, ESP, seat belts etc.