Putting the X in Extreme!
Our Mamba Monster X ESC and 1512-2650Kv are paired together to overpower 1:8th scale buggies and on-road cars weighing up to 9lbs (with batteries, ready-to-run) as well as 1:10th scale monster trucks. The 1512-2650Kv version is capable of 2S to 4S LiPo and you will have all the power your vehicle demands with the smoother throttle control of a sensored motor. Mamba Monster X takes Castle’s legendary “monster” performance to a whole new level.
New Firmware Available! Version 2.06 added 'Drag Brake Ramp' feature. Allows user to adjust the rate at which the drag brake is applied at neutral.
Technical Specs | |
---|---|
Electronic Speed Controller: | |
Input Voltage Range: | MIN: 2S LiPo MAX: 6S LiPo (4s max with included 1512-2650kv motor) |
BEC Specifications: | Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V |
Operating Environment: | Waterproof* design allows for use in nearly any environment. |
Brake: | Proportional |
Reversible: | Yes, but may be disabled for racing. |
On/Off Switch: | Yes |
Cooling Fan: | Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) |
Size: | Length: 2.09" (53mm) Width: 1.93" (49mm) Height: 1.44" (36.4mm) |
Weight (with no battery connector): | 3.92 oz. (111.g) |
Connectors: | 6.5mm female bullets for motor connection. |
Items Needed for Operation: | Batteries with XT90 connectors or run 1 battery with our included XT90 Jumper Plug |
Product Use Statements: | *Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. |
Application Guidelines: | Intended for up to 4S (25.2 Volt) operation in vehicles weighing less than 9 lbs, with batteries, ready-to-run. |
Recommended Motors: | Combo includes Castle sensored 1512-2650Kv: Max Cells: 4s |
Max. Recommended Vehicle Weight: | Less than 9 lbs, with batteries, ready-to-run with included 1512-2650Kv motor. |
Programmability: | Fully programmable Castle feature set using Castle Link USB Adapter (coupon for free Link included) and freely downloadable Castle Link Windows software, or the Castle Link iOS App and a B Link Bluetooth Adapter (sold separately). |
Tech Notes: |
|
Motor: | |
Input Voltage Range: | 2-4S LiPo |
Kv: | 2650 |
Max. RPM: | 60,000 |
Size: | Length: 67.7mm Diameter: 40mm (41.4mm with fins) |
Weight (w/wires): | 383g (13.6oz); 334g without wires. |
Shaft Size: | Length: 20mm Diameter: 5mm |
Mounting Hole Specifications: | M3 and M4 @ 25mm |
Cooling Fan: | We sell all kinds of fans and brackets separately |
Connectors: | 6.5mm male Castle Bullet Connectors, includes 210mm length sensor wire. |
Application Guidelines: | Ideal for 1:8 scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9lbs. (ROAR 1/8 MOD APPROVED) up to a 4s LiPo. |
Max. Recommended Vehicle Weight: | See application guidelines |
Tech Notes: | Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. |