Welcome to our Ebay store

We specialize in 
RC Power Products 
such as
ESC's, motors, 
and wiring accessories. 

READY TO RUN AVAILABLE!
Connector(s) Attached 

Along with 
QS8 Connectors & Accessories!

We sell the best selection of
esc mount plates available!

Check out our mounts
that fit
Traxxas X Maxx, XRT,
 & Maxx Trucks!

Fit Arrma Kraton/Outcast
6s & 8s Trucks!

And try our
 8 volt  28 cfm
4028
Super  High Speed Fans
NO MORE NEED
for 3s or 4s
extra batteries in
your car to run
the cooling fans!!

Just plug into 
the receiver for
high speed fans!



WE COMBINE SHIPPING!
1 FEE FOR MULTIPLE ITEMS!

Listed item Specifics:

Castle Creations

Mamba Monster X 6s esc
With
 (1) Male QS8 Attached

Lifetime guarantee on the
connector staying attached
to the esc!


 The Single QS8 is a 
great way to run esc's!
You can easily run 
1 battery or 2 in series
by choosing one of our 
series harness options

Save money in this listing
by buying the harness
with the ESC!

There is 4" of ESC 
wire length
to the QS8

Harness Options:
All Harnesses have
(1) Female Connector 
to 
(2) Male Connectors


(1) QS8 Male 
attached to esc
(NO HARNESS OR PLUG)

A
(1) QS8 Male 
attached to esc
Includes: 
QS8 Series Harness
Doubles Battery Voltage
10 awg wire
1 1/2" Wire Lengths

B
(1) QS8 Male 
attached to esc
Includes:
QS8 Series Harness
Doubles Battery Voltage
10 awg wire
3" Wire Lengths

C
(1) QS8 Male 
attached to esc
Includes: 
QS8 Series 
No Wire Plug
10 awg equivalent
Doubles Battery Voltage

D
(1) QS8 Male 
attached to esc
Includes:
QS8 to EC5/IC5
Series Harness
Doubles Battery Voltage
10 awg wire
1 1/2" Wire Lengths

E
(1) QS8 Male 
attached to esc
Includes:
QS8 to EC5/IC5
Series Harness
Doubles Battery Voltage
10 awg wire
3" Wire Lengths

F
(1) QS8 Male 
attached to esc
Includes:
QS8 to XT90
Series Harness
Doubles Battery Voltage
10 awg wire
3" Wire Lengths

G
(1) QS8 Male 
attached to esc
Includes: 
QS8 Series 
XT90
No Wire Plug
8 awg equivalent
Doubles Battery Voltage

H
(1) QS8 Male 
attached to esc
Includes:
QS8 to Traxxas Connectors
Series Harness
Doubles Battery Voltage
10 awg wire
3" Wire Lengths
Works on ALL
Traxxas Connectors!

PUTTING THE X IN EXTREME!

Mamba Monster X is our latest 1:8 scale and Monster truck controller capable of 2S - 6S LiPo, with an 8 amp peak BEC - and, it’s waterproof*, so you can run your vehicle through morning dew, across soggy snow, or a muddy trail. This is the perfect upgrade for 1:8 scale buggies, truggies and on-road vehicles as well as 1:10 scale monster trucks weighing up to 15 lbs with our Castle 1515 2200kv motor. It also comes standard with a highly efficient, 30mm ESC cooling fan.

FEATURES:
  • Input Voltage range 2S-6S
  • 8A Adjustable BEC (5.25V-8.0V)
  • Waterproof design.
  • Removable 30MM cooling fan.
  • Convenient transmitter programming for six common adjustable settings.
  • Easily program and update ESC with use of Castle Link USB (coupon included for free USB with purchase) and freely downloadable Castle Link Window Program.
  • Data Logging capable
  • Telemetry Ready
  • Aux wire function allows for “on-the-fly” adjustments such as Max Power and Max Brake.
  • Audible alerts that will notify you of possible issues with calibrations and error conditions.
  • Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.

Mamba Monster X ESC Only Purchase Includes:
  • Mamba Monster X ESC with QS8 attached
  • Motor wire packet for motor connection (connectors sold separately)
  • Sensor Harness
  • Coupon for free Castle Link USB adapter
  • Driver's Ed and Quick Start Guide
  • Castle Decals

Technical Specs
Input Voltage Range:MIN: 2S LiPo
MAX: 6S LiPo (25.2V)
BEC Specifications:Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment:Waterproof* design allows for use in nearly any environment.
Brake:Proportional
Reversible:Yes, but may be disabled for racing.
On/Off Switch:Yes
Cooling Fan:Yes, factory equipped (30mm), fully removable** (see Product Use Statements below)
Size:Length: 2.09" (53mm)
Width: 1.93" (49mm)
Height: 1.44" (36.4mm)
Weight (with no battery connector):3.92 oz. (111.g)
Connectors:6.5mm female bullets for motor connection.
Items Needed for Operation:Batteries
Product Use Statements:
*Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode   when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind.

**The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Application Guidelines:Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run.
Not recommended for use in high speed 1/8th and larger applications (IE Arrma Infraction and Limitless, Traxxas XO-1)
Recommended Motors:Castle 1512 1800/2650Kv: Max Cells: 4S Lipo or 12 NiMH
Castle 1515 2200Kv: Max Cells: 6S Lipo or 16 NiMH
Max. Recommended Vehicle Weight:Less than 15 lbs, with batteries, ready-to-run with 2200kv motor; no more than 9 lbs with 1800/2650kv motor
Programmability:Fully programmable Castle feature set using Castle Link USB Adapter (coupon for free Link included) and freely downloadable Castle Link Windows software, or the Castle Link iOS or Android App and a B Link Adapter(sold separately).
Telemetry Link Capable:Yes
Tech Notes:
  1. Mamba Monster X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell).
  2. Our experience  suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups.
  3. Applying voltages higher than 25.2V will cause irreparable damage to ESC.
  4. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our QS8 Connector. We sell them in pairs, Male & Female only listings, and in Lots.

Product Features
Date Logging:
Mamba Monster X can capture and record performance data from your last couple of runs, commonly referred to as data logging. This data can be downloaded via the Castle Link USB programmer; you can use the Quick Connect Duo (sold separately) to allow you to access both wires into a single Castle Link connection. You can then analyze this data and make adjustments to the ESC to maximize both performance and battery life.
Auxiliary Functionality:
Mamba Monster X features the addition of a new, programmable AUX wire that allows you to make “on-the-go” adjustments to several settings such as torque control, and max throttle, and fine-tune the performance of your ESC right from the transmitter using an auxiliary channel on the receiver. The AUX wire function is disabled by default but is programmable via Castle Link or the Castle Link iOS App. Once you have programmed the functionality of the AUX wire, that setting can then be adjusted on-the-go from a compatible transmitter. 
Programmability:
Fully programmable Castle feature set using Castle Link USB Adapter (coupon for free Castle Link adapter included in package) and freely downloadable Castle Link Windows software or the Castle Link iOS App and a B Link Bluetooth Adapter (A small subset of the settings available through Castle Link Windows software can be accessed via manual programming through the transmitter stick).
Firmware Updates:
Users will receive free access to all firmware updates, including added features sets using the Castle Link USB Programming Kit. 
Power System Alerts:
Mamba Monster X also features updated Audible Alerts that will notify you of possible issues with calibrations and error conditions to help diagnose problems in the field 
Telemetry Capable:
Mamba Monster X is telemetry ready, which means owners of Futaba T4PX Transmitters will be able to purchase the Castle Creations Real-time data such as ESC temperature, voltages, and RPM can be monitored to ensure performance advantages and spare you the “unknown” parameters that all R/C enthusiasts experience at some point. Telemetry data provides another level of protection and can increase performance.
Warranty:
Castle Creations, Inc. warrants this product to be free from manufacturing defects for a period of one year from date of purchase. 

Castle Link Compatible
With the Castle Link USB Programming Kit you can use your Windows™ PC to easily program your controller. Castle Link includes all code for all Castle Link compatible hobby products in one convenient download.

Adjustable settings include:

  • Throttle
  • Braking curve
  • Drag brake
  • Auto LiPo cutoff
  • Punch Control
  • Reverse Type
  • Motor Type

Additional Castle Link benefits include:
  • Access expanded programming and custom parameters for Castle controllers
  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge.
  • Intuitive Demo Mode capability
  • Ability to default ESC to factory settings
  • Ability to save setup profiles for later use
  • Ability to download and view data logs (on applicable controllers)
 
Hit "Save this Seller"
we are adding cool items!


Thank You!
We APPRECIATE Your Business!