Welcome to our Ebay store
We specialize in
RC Power Products
such as
ESC's, motors,
and wiring accessories.
READY TO RUN AVAILABLE!
Connector(s) Attached
Along with
QS8 Connectors & Accessories!
We sell the best selection of
esc mount plates available!
Check out our mounts
that fit
Traxxas X Maxx, XRT,
& Maxx Trucks!
Fit Arrma Kraton/Outcast
6s & 8s Trucks!
And try our
8 volt 28 cfm
4028
Super High Speed Fans
NO MORE NEED
for 3s or 4s
extra batteries in
your car to run
the cooling fans!!
Just plug into
the receiver for
high speed fans!
WE COMBINE SHIPPING!
1 FEE FOR MULTIPLE ITEMS!
Listed item Specifics:
Monster X 6s ESC
&
1512 1800kv Combo
ESC is 6s capable but run up to 4s
with included 1800kv motor
Excellent 4s combo!
Choose your connector(s)
We use Genuine Amass
for EC5, XT90
Lifetime guarantee on the
connector staying attached
to the esc!
For series harnesses we use a
4" red 10 awg wire
For 8mm Bullet Connectors:
8mm Male on the Positive Wire
8mm Female on the Negative Wire
Putting the X in Extreme!
Mamba Monster X paired with our 1512-1800Kv motor is capable of 2S to 4S LiPo and is perfect for 1:8th scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9 lbs. You will have all the power your 1:8th scale vehicle demands with the smoother throttle control of a sensored motor. Mamba Monster X takes Castle’s legendary “monster” performance to a whole new level.
New Firmware Available! Version 2.06 added 'Drag Brake Ramp' feature. Allows user to adjust the rate at which the drag brake is applied at neutral.
- Input Voltage range 2S-4S (with included 1512-1800Kv motor)
- 8A Adjustable BEC (5.25V-8.0V)
- 1512 1800kv motor, 4 pole, 12 slot sensored
- Waterproof design.
- Removable 30MM cooling fan.
- Convenient transmitter programming for six common adjustable settings.
- Easily program and update ESC with use of Castle Link USB (coupon included for free USB with purchase)
- Data Logging capable
- Telemetry Ready
- Audible Alerts that will notify you of possible issues with calibrations and error conditions.
- Designed and manufactured in Olathe, Kansas and is backed by our 1-year warranty.
*Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.
Mamba Monster X Combo Includes:
- Mamba Monster X ESC
- 1512-1800Kv Sensored Motor
- Castle Sensor Harness Adapter
- 210mm length sensor wire (for sensored operation)
- Coupon for free Castle Link USB adapter
- Driver's Ed and Quick Start Guide
- Castle Decals
| Technical Specs | |
|---|---|
| Controller: | |
| Input Voltage Range: | MIN: 2S LiPo MAX: 6S LiPo (4S max with included 1512-1800Kv motor) |
| BEC Specifications: | Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V |
| Operating Environment: | Waterproof* design allows for use in nearly any environment. |
| Brake: | Proportional |
| Reversible: | Yes, but may be disabled for racing. |
| On/Off Switch: | Yes |
| Cooling Fan: | Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) |
| Size: | Length: 2.09" (53mm) Width: 1.93" (49mm) Height: 1.44" (36.4mm) |
| Weight (with no battery connector): | 3.92 oz. (111.g) |
| Connectors: | 6.5mm female bullets for motor connection. |
| Items Needed for Operation: | Batteries |
| Product Use Statements: | *Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. |
| Application Guidelines: | Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run. |
| Recommended Motors: | Combo includes Castle sensored 1515 1800Kv: Max Cells: 4s Lipo or 16 NiMH |
| Max. Recommended Vehicle Weight: | Less than 15 lbs, with batteries, ready-to-run |
| Programmability: | Fully programmable Castle feature set using Castle Link USB Adapter (coupon for free Link included) and freely downloadable Castle Link Windows software. |
| Telemetry Link Capable: | Yes |
| Tech Notes: |
|
| Motor Specs | |
|---|---|
| Input Voltage Range: | 2-4S LiPo |
| Kv: | 1800 |
| Max. RPM: | 60,000 |
| Size: | Length: 67.7mm Diameter: 40mm (41.4mm with fins) |
| Weight (w/wires): | 385g (13.6oz); 336g without wires. |
| Shaft Size: | Length: 20mm Diameter: 5mm |
| Mounting Hole Specifications: | M3 and M4 @ 25mm |
| Cooling Fan: | Optional, coming soon! |
| Connectors: | 6.5mm male Castle Bullet Connectors, includes 210mm length sensor wire. |
| Application Guidelines: | Ideal for 1:8 scale buggies, truggies, on-road vehicles and 1:10 scale monster trucks up to 9lbs. |
| Max. Recommended Vehicle Weight: | See application guidelines |
| Tech Notes: | Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. |
We Combine On Shipping
Hit "Save this Seller"
we are adding cool items!
Thank You!
We APPRECIATE Your Business!