Putting the X in Extreme!
Mamba Monster X paired with our 1512-1800Kv motor is capable of 2S to 4S LiPo and is perfect for 1:8th scale off-road and on-road vehicles as well as 1:10 scale 4WD SCT up to 9 lbs. You will have all the power your 1:8th scale vehicle demands with the smoother throttle control of a sensored motor. Mamba Monster X takes Castle’s legendary “monster” performance to a whole new level.
New Firmware Available! Version 2.06 added 'Drag Brake Ramp' feature. Allows user to adjust the rate at which the drag brake is applied at neutral.
Technical Specs | |
---|---|
Controller: | |
Input Voltage Range: | MIN: 2S LiPo MAX: 6S LiPo (4S max with included 1512-1800Kv motor) |
BEC Specifications: | Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V |
Operating Environment: | Waterproof* design allows for use in nearly any environment. |
Brake: | Proportional |
Reversible: | Yes, but may be disabled for racing. |
On/Off Switch: | Yes |
Cooling Fan: | Yes, factory equipped (30mm), fully removable** (see Product Use Statements below) |
Size: | Length: 2.09" (53mm) Width: 1.93" (49mm) Height: 1.44" (36.4mm) |
Weight (with no battery connector): | 3.92 oz. (111.g) |
Connectors: | 6.5mm female bullets for motor connection. |
Items Needed for Operation: | Connector for ESC |
Product Use Statements: | *Although Mamba Monster X and Castle brushless motors are waterproof, they are not intended for operation while completely submerged in liquid. They can corrode when exposed to corrosive materials, such as salt water. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. |
Application Guidelines: | Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 15 lbs, with batteries, ready-to-run. |
Recommended Motors: | Combo includes Castle sensored 1515 1800Kv: Max Cells: 4s Lipo or 16 NiMH |
Max. Recommended Vehicle Weight: | Less than 15 lbs, with batteries, ready-to-run |
Programmability: | Fully programmable Castle feature set using Castle Link USB Adapter (coupon for free Link included) and freely downloadable Castle Link Windows software. |
Telemetry Link Capable: | Yes |
Tech Notes: |
|
Motor Specs | |
---|---|
Input Voltage Range: | 2-4S LiPo |
Kv: | 1800 |
Max. RPM: | 60,000 |
Size: | Length: 67.7mm Diameter: 40mm (41.4mm with fins) |
Weight (w/wires): | 385g (13.6oz); 336g without wires. |
Shaft Size: | Length: 20mm Diameter: 5mm |
Mounting Hole Specifications: | M3 and M4 @ 25mm |
Cooling Fan: | Use our 40-42mm motor brackets. Search "RCP Xtreme Cool" for our cooling products. |
Connectors: | 6.5mm male Castle Bullet Connectors, includes 210mm length sensor wire. |
Application Guidelines: | Ideal for 1:8 scale buggies, truggies, on-road vehicles and 1:10 scale monster trucks up to 9lbs. |
Max. Recommended Vehicle Weight: | See application guidelines |
Tech Notes: | Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs. |