Chassis Guard Pro Lanolin Oil Clear Rustproofing 2500ML Tin

25% off whilst we finalise artwork etc.

Building on Chassis Guards success Chassis Guard Pro is how we WANTED to build chassis guard originally, but couldnt work all those extra's into the cost. Chassis Guard Pro goes above and beyond jsut a high quality lanolin coating. 

Chassis Guard Pro includes ALL the benefits of Chassis Guard Original, but includes MORE Lanolin, MORE Anti-corrosives, INCLUDES ceramic, and adds Vapour Phase Inhibition into the Mix. Chassis Guard pro also includes soem slightly more premium materials. Its like having a gourmet burger, instead of a plain one ;)

Benefits of Chassis Guard Pro

• More Premium Refined Lanolin. No smell, no blocking, just results.

• More anti-corrosives- more effective, longer lasting, just as tolerant.

• Infused with Ceramic- Even tougher for those more demanding environments.

• Improved HD Spray bottles.

• VPI - See our Blog (link to follow shortly).

• 12 month protection prior to topup.
• Great for topping up existing treatments new and old.
• High penetration into existing corrosion.
• Extra hydrophobic to shed water and minimise latent moisture build up.
• Easy to remove.
• Non Toxic once cured
• Biodegradeable.
• Ultra Low VOC, and absolutely minimised harmful emissions during curing.
• Clear so you visually inspect the substrate.
• Superb as a wood treatment  / preservative.
• Safe on rubber and plastics- Chassis Guard Pro actually nourishes and rejuvenates them.
• Restores deep colour on paints, especially bedliners.
• Can be used as an oil based paint additive (use tinned for up to 5%) for better flow and anti corrosive characteristics).
• Great as a cavity treatment with great rust penetration and creep.
• Drives heavy corrosion from the base steel over time.

Drawbacks of Chassis Guard Pro

• Clear- we have no plans or intention to release a coloured version.
• As a result of us minimising the VOC content this product takes a good 8 hours to touch dry. Ideally needs longer before use such as 24 hours.

How to use Chassis Guard Pro

• Remove any mud
• Heavier corrosion can be removed to increase product penetration, or can be left and topped up later on be aware that large lumps of rust (delamination) can come off and not be fully penetrated. If you treat a vehicle with lumps of rust, ensure you inspect and topup more often whilst the corrosion is driven off the base metal by Chassis Guard over time.
• 3>6 month protection apply one heavier coat and fully seal the surface.
• 6>12 month protection, apply one full covering coat, and leave for 48 hours or more. Then apply a full second "heavy" coat. protect from getting wet, and allow to become touch dry prior to use
• We recommend visual inspections are placed every 3 months for higher wear areas such as backs of wheel arches, and the rear 1/4 of most vehicles.

Whilst Chassis Guard Pro is largely made of food grade, or derived from food grade materials, do not ingest it and take steps to not breath it in. Such PPE as a dust mask, goggles and gloves are recommended.

Application / mixing of Chassis Guard Pro

Brush / roller use as is

HVLP use a 1.8>2.5mm tip. generally does not need thinning. can be warmed rather than thinned. Use up to 5% white spirit or our 1K multi-thinner if not flowing well.

Hand / Pressurised sprayers- thin 10>15% using white spirit, or our 1K multi-thinner.

Schutz / wax oil guns use neat for external spraying, thin to suit for cavities (i would start around 20% white spirit or our 1K multi-thinner if not flowing well.)

Hand Sprayers are pre thinned. Use in the hand sprayer.