Lock with 2 keys for split door VMC-27, Table top VMC-27, VMC-33, VMC-Dual 27 machines. (See pictures 2 and 3 for Drink Machine examples)

If you need to remove a lock like this by drilling it out - here are the instructions.  Start with a 1/8" drill bit.  Drill into the very center of the lock all the way through the lock.  Go up one size in drill bit and drill all the way through again.  Continue going up gradually in size until the pins fall out or you can pull the pins out of the lock.  Stick a wood or sheet metal screw into the first hole you drilled and twist.  It should unlock the door.  Once the lock is opened, take it off the door.  The reason we gradually go up in size in drill bits is there are case hardened brass pins and if you try to start with a larger size you will grab the bit and break it.  If that happens you are in a real mess!

Please email me with any questions.  Check out my other auctions.  Thanks and God Bless :)

NOTE:

***  I ALSO HAVE THE LOCK AND KEY SETS FOR VMC-27 AND VMC-33 3D THAT HAS A SOLID ONE PIECE DOOR IN ANOTHER AUCTION.  JUST EMAIL ME AT LET ME KNOW IF YOU HAVE A 5/8" OR 7/8" LENGTH LOCK. ***

THANKS BOBBY