WELCOME TO OUR PAGE

5 x 120 VW Transporter T5/T6 Wheel Spacers sold in pairs 

20mm spacers are supplied with 10 x 57mm thread M14 x 1.5 HT wheel bolts with a 19mm Bolt Head
Floating collar Radius head bolts are sent with these spacers

30mm spacers are supplied with 10 x hub fixing 30mm thread length 17mm hex head bolts only. You can use your existing wheel bolts to secure the wheels.

ALL OUR BOLTS ARE TUV APPROVED BY THE TECHNICAL INSPECTION ASSOCIATION

***PLEASE NOTE THESE SPACERS ARE FOR ORIGINAL T5 T6 ALLOY AND STEEL WHEELS ONLY WITH AN ORIGINAL BOLT THREAD LENGTH OF 37MM ONLY***

MADE FROM 163MM BILLET ALUMINIUM TO SUIT THE STEEL WHEELS

• Thickness - 20mm (slip on) and 30mm (Bolt on)

All our custom-made spacers and adapters are manufactured from 6082 T6 Solid billet Aluminium and machined by our skilled Engineers at our Barnsley HQ.

One of the most cost-effective mods on the market and easy to fit in 7 steps

• Simply unbolt your wheel and remove.

• Wire brush and wipe the bore and wheel hub clean, (must be dirt/rust free)

• Apply a little copper grease or similar to stop the faces sticking together.

• Slide the adapter on to your existing hub and tighten up with the bolts provided.

• Check the adapter is sitting flush against the original hub with no visible gap

• Gently position the wheel on to the adapter spigot taking care not to damage the machined surfaces.

• Secure the wheel with the wheel bolts and torque them to the required spec not exceeding 150nm.

Watfields Precision Engineering also manufacture custom parts as well as wheel spacers and adapters.

All our wheel spacers are manufactured from material sourced in the UK and are produced by Watfields Precision Engineering UK LTD.

Visit www.watfields.com

Please contact us to discuss any enquiries you may have