Function:

1. The 16-segment sound column design is adopted, and the plexiglass length and width design is reasonable (the golden ratio design is adopted, the sides are longer than the front), so that the plexiglass can produce a gorgeous and soft visual effect on the light refraction. The height of the KS16 design is also the most conducive to placement

2. KS16 uses 1T single-chip microcomputer, high-speed acquisition of signals, accurate response

3. 8 classic modes, button control, with power-down memory

4. 7-level gain setting, long press the button to set

5. The left and right channels can be set by buttons

6. The new version adopts fog-like frosted LED, the color is soft and not dazzling

7. Red, yellow, green, blue, orange and pink, 6 color combinations determined by many experiments, excessively natural

8. Adopting white PCB design, white has a good reflection effect on light, which can make the overall color more uniform and gorgeous

9. Due to the high density and heavy weight of plexiglass, 304 stainless steel screw is used as the gravity support of the sound column, and each layer of stainless steel nuts is fixed, which can ensure that the plexiglass is level, does not tilt and does not shake, and is strong and durable (pirated products are directly used PCB is used to fix the bulky plexiglass. It cannot be guaranteed that the glass will not tilt, and the PCB will bend, it is easy to fall apart. It is even more difficult to look directly from the back. Our KS16 is surrounded by arc plexiglass, and the back can also reflect the LED light)

10. Adopting the design of PCB embedded plexiglass, the front and back of the product are all the same arc, so that the overall appearance and feel are very good, and the refraction effect can be seen at the rear

11. Adopts rear-mounted input, which is convenient for placement and does not affect the positive visual effect

KS16 has 8 classic display modes, which can be set by pressing the button and set with memory function.

Mode 1: Columnar mode

Mode 2: Columnar belt peak hold mode

Mode 3: Columnar band peak, the peak moves upwards out of the mode

Mode 4: Mirror mode, center to both sides (new, video not updated)

Mode 5: Single point mode

Mode 6: Peak shift up out of mode

Mode 7: Single peak mode

Mode 8: Silent full-bright mode (can be used to test LED)

Special note: This product kit is not difficult to make, and the soldering is relatively simple. If you don’t know how to solder SMD chips, you only need 2 US dollars. Please take the main chip soldering together. I will help you solder it before shipment. The rest is It's very simple. If you do not know how to weld, please buy the finished product directly, the quality is guaranteed.

 
   Packing List

  1pc NEW KS16 Music Spectrum Light Cube LED Level Making DIY/VU Tower