DS18 Package 12" 900W Subwoofer w Ported Box and Amp
(DS18 LSE-112A)
We Think You Should Know
  • Australian DS18 Warranty
  • Purchase Guarantee (see T&C's)
  • Designed in the U.S.A
  • Bass Package Includes:
    • 12" Subwoofer
    • Subwoofer Enclosure
    • 1Ch Sub Amplifier
    • 4 GA Amp Kit
  • Preloaded with 12'' Subwoofer
  • 500W Peak / 250W RMS Power
  • Sensitivity: 90dB
  • Freq Resp: 29-250Hz
  • 4 ohms Impedance
  • Ferrite Magnet
  • 35HZ Ported Box
Overview 1 x SLC-MD12.4 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 500W
Designed exclusively to bring breathtaking bass to car audio enthusiasts like you, DS18's LSE-112A is the key to unlocking the bass you can feel! DS18's LSE-112A Bass Package is the epitome of convenience, delivering mind-blowing bass in a single, all-inclusive package. The prefabricated box features a solid construction of 1/2-inch MDF, ensuring optimal strength and resonance. Tuned to perfection at 35Hz, this enclosure is designed to improve your subwoofer's low-frequency response.
Durability is at the forefront of our design philosophy. We've engineered the LSE-112A to withstand the test of time, ensuring that you'll enjoy hard-hitting bass for years to come. With a rugged construction and high-quality materials, this bass package is built to endure the demands of your music, even under the most intense conditions.
At the heart of the LSE-112A Bass Package is the renowned MD12.4 subwoofer. With an impressive 250W RMS Power Handling and a single 4-ohm impedance voice coil, this subwoofer packs a punch well above its weight class. The MD12.4's unparalleled cone area helps it generate deep, rich bass that will resonate throughout your entire vehicle. With a sensitivity of 93dB, the MD12.4 effortlessly reproduces frequencies from 29Hz to 250Hz, for bass response that will blow you away.
Complementing the subwoofer is the S-1500.1/RD amplifier, a true Monoblock powerhouse that pushes your audio system to the next level. With 350W of RMS power output at 2 ohms and 220W at 4 ohms, this Class AB amplifier delivers clean, distortion-free sound that will satisfy even the most discerning audiophiles. The carefully calibrated gain and crossover ranges provide precise control over your bass, allowing you to fine-tune every detail of your audio experience.
But that's not all. To complete this exceptional package, we've included a 4-GA Amp Kit that ensures a hassle-free installation. From the AGU Fuse Holder to the Red/Black Twisted RCA Cable, every component has been handpicked for maximum performance and durability. We've left no stone unturned to deliver an all-encompassing solution that meets and exceeds your expectations.


DS18 - The Brand DS18 manufactures high-quality car audio products, including speakers, amplifiers, subwoofers, and more. The company was founded in 2009 and has since grown to become a leading brand in the car audio industry, known for its innovative designs and commitment to quality.

100% AUSTRALIAN

(All items shipped from our Sydney
warehouse)

EXPRESS SHIPPING

Australia Wide

PRODUCT GUARANTEE

Local Aust Warranties

ORDER ONLINE

Pick Up in Store

Model Number: LSE112A

Model Number: LSE112A

DS18 Package 12" 900W Subwoofer w Ported Box and Amp
(DS18 LSE-112A)

We Think You Should Know

  • Australian DS18 Warranty
  • Purchase Guarantee (see T&C's)
  • Designed in the U.S.A
  • Bass Package Includes:
    • 12" Subwoofer
    • Subwoofer Enclosure
    • 1Ch Sub Amplifier
    • 4 GA Amp Kit
  • Preloaded with 12'' Subwoofer
  • 500W Peak / 250W RMS Power
  • Sensitivity: 90dB
  • Freq Resp: 29-250Hz
  • 4 ohms Impedance
  • Ferrite Magnet
  • 35HZ Ported Box

Overview

1 x SLC-MD12.4 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 500W

Designed exclusively to bring breathtaking bass to car audio enthusiasts like you, DS18's LSE-112A is the key to unlocking the bass you can feel! DS18's LSE-112A Bass Package is the epitome of convenience, delivering mind-blowing bass in a single, all-inclusive package. The prefabricated box features a solid construction of 1/2-inch MDF, ensuring optimal strength and resonance. Tuned to perfection at 35Hz, this enclosure is designed to improve your subwoofer's low-frequency response.

Durability is at the forefront of our design philosophy. We've engineered the LSE-112A to withstand the test of time, ensuring that you'll enjoy hard-hitting bass for years to come. With a rugged construction and high-quality materials, this bass package is built to endure the demands of your music, even under the most intense conditions.

At the heart of the LSE-112A Bass Package is the renowned MD12.4 subwoofer. With an impressive 250W RMS Power Handling and a single 4-ohm impedance voice coil, this subwoofer packs a punch well above its weight class. The MD12.4's unparalleled cone area helps it generate deep, rich bass that will resonate throughout your entire vehicle. With a sensitivity of 93dB, the MD12.4 effortlessly reproduces frequencies from 29Hz to 250Hz, for bass response that will blow you away.

Complementing the subwoofer is the S-1500.1/RD amplifier, a true Monoblock powerhouse that pushes your audio system to the next level. With 350W of RMS power output at 2 ohms and 220W at 4 ohms, this Class AB amplifier delivers clean, distortion-free sound that will satisfy even the most discerning audiophiles. The carefully calibrated gain and crossover ranges provide precise control over your bass, allowing you to fine-tune every detail of your audio experience.

But that's not all. To complete this exceptional package, we've included a 4-GA Amp Kit that ensures a hassle-free installation. From the AGU Fuse Holder to the Red/Black Twisted RCA Cable, every component has been handpicked for maximum performance and durability. We've left no stone unturned to deliver an all-encompassing solution that meets and exceeds your expectations.

DS18 LSE-112A 1 x SLC-MD12.4 In a Ported Box with S-1500.1/RD Amplifier and 4-GA Amp Kit 500W

DS18 - The Brand

DS18 manufactures high-quality car audio products, including speakers, amplifiers, subwoofers, and more. The company was founded in 2009 and has since grown to become a leading brand in the car audio industry, known for its innovative designs and commitment to quality.


LSE-112A BASS PACKAGE

1 x 12" Subwoofer
SLC-MD12
1 Ported Vented Box
LSE-112A
1 Monoblock Amplifier
S1500.1/RD
1 Amplifier Installation Kit
AMPKIT4

12" SUBWOOFER

Nominal Diameter
12"
Nominal Impedance
4 Ohm
RMS Power Handling
250W
MAX Power Handling
500W
Sensitivity (1w/1m)
90dB
Frequency Response
29-250Hz
Recommended HI Pass Crossover
80Hz
Magnet Weight
42 oz
Magnet Material
Ferrite

PORTED BOX

Port Tune
35Hz
Internal Volume
45.3L
Load Configuration
Front Porte
Box Material
1/2" MDF
Finish Material
Carpet
Measurement L x W x H (Inches)
19 x 14 x 14

MONOBLOCK AMPLIFIER

Circuit Topology
Class AB Monoblock Amplifier
RMS Power Output @ 2 Ohm
350 Watts
RMS Power Output @ 4 Ohm
220W
Total Harmonic Distortion
<.3%
S/N Ratio Ref 1w @ 4 Ohm
>90 db
Gain Range
0.2-6V
Crossover Range
50-250hz
Frequency Range
20Hz-500 Hz
Measurement L x W x H (Inches)
13.7 x 5.8 x 1.8

  • DS18 Bass Package:
    • 1 x 12" Subwoofer SLC-MD12
    • 1 Ported Vented Box LSE-112A
    • 1 Monoblock Amplifier S1500.1/RD
    • 1 Amplifier Installation Kit AMPKIT4

Returns Policy

CHANGE OF MIND RETURNS

  • You have 30 days to return your items (some exclusions apply) for a refund or an exchange as long as the item is returned in a saleable condition with the original proof of purchase. The refund will be processed using your original payment method and a restocking fee of up to 20% will apply.
  • By saleable condition we mean that the item hasn't been opened or used, is still in its original packaging and all manuals and accessories are included.
  • If you can't provide proof of purchase we will be unable to provide you with an exchange or refund.

EXCLUDED CHANGE OF MIND ITEMS

  • Special order items (this may include items marked out of stock at the time of order) are excluded.
  • Any used items.
  • Any product returned with damage to the product, packaging, removal of any bar code or manufacturer's label will be rejected, and returned at the customers cost. We recommend bubble wrapping all returned products to ensure safe arrival.
  • Any items missing from the returned product will be subject to a replacement charge and deducted from the total refund amount, in addition to restocking fee.
  • Goods should be received to the warehouse within 2 weeks from APPROVED return authorisation, unless previously arranged.

INCORRECT PRODUCT RECEIVED/INCORRECTLY ADVERTISED

  • Wrongly shipped items should be reported immediately. You will receive a return authority and goods will be organised to be returned at the sellers cost and replaced or refunded as per customer request.
  • Products should remain in retail packaging in new condition.
  • Any items missing from the returned product will be subject to a replacement charge and deducted from the total refund amount.
  • If a product is incorrectly listed or ‘not as described’ this should be reported immediately. We will assist in supplying a suitable replacement if available or a full refund will be issued. You will receive a return authority and goods will be organised to be returned at the sellers cost and replaced or refunded as per customer request.

RETURN OF FAULTY GOODS

DAMAGED GOODS

  • Any damage from shipping should be reported immediately. You will receive a return authority and goods will be organised to be returned at the sellers cost and replaced or refunded as per customer request.

Any items missing from the returned product will be subject to a replacement charge and deducted from the total refund amount.

EARLY LIFE FAILURE

  • Any goods received Dead on Arrival (DOA) or Early Life Failure (ELF) must be reported within the first the first 14days from successful delivery to the manufacturer add/or to us with their accompanying support or case number. You will be issued a return authorisation for replacement/exchange or refund as per customer request.
  • Goods should be received to the warehouse within 2 weeks from APPROVED return authorisation, unless previously arranged.
  • Refunds/Exchanges will be processed within 2-3 business days from receipt back into our warehouse.
  • Any items missing from the returned product will be subject to a replacement charge and deducted from the total refund amount, or deducted from replacement kit.
  • Shipping costs will be covered by the seller.

IN WARRANTY PERIOD

  • Goods outside of DOA/ELF are subject to manufacturers terms and conditions for repair/ replacement. Your goods are required to go back to the manufacture for assessment and replacement. Contact us and you will be replied with the fastest option to have this repaired or replaced. You will be given a repair number and any updates as available.
  • Please allow up to 4 weeks for goods to be repaired.
  • The buyer is responsible for shipping charges back to the seller. The seller will return the unit at their cost to an Australian address.

Peace of Mind Purchase Guarantee
This product is supplied via DS18 Australia and enjoys the FULL benefits of the 'Genuine DS18 Australian Warranty'. (You may also be entitled to other consumer warranties as provided by the Australian Consumer Guarantee and these entitlements are not limited by this warranty). In the event that this product should fail please contact our service department or you can speak with DS18 Australia directly.

We are a FULLY AUTHORISED Australian retailer for DS18 Australia.

Disclaimer
Due to differing operating costs associated with selling products via different marketplaces, our pricing may vary.