TELTONIKA 4G/LTE Industrial cellular router rut200

RUT200 is a compact industrial cellular router that provides reliable, mission-critical connectivity in rigorous conditions common in industries like automation, transportation, and manufacturing. This model is equipped with 4G LTE, Wi-Fi, and two Ethernet ports, making it ideal for quickly setting up primary and backup connectivity with remote management capabilities.

FEATURES:

-4G/LTE (Cat 4), 3G, 2G Conectivity

-WiFi Wireless Access Point with Hotspot functionality

-Wan Failover Automatic switching to available Backup connection

-RMS For remote management, access & VPN services



Technical Specifications

MOBILE

- Mobile module 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps

- 3GPP Release Release 9

- Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID

- SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP

- USSD Supports sending and reading Unstructured Supplementary Service Data messages

- Black/White list Operator black/white list

- Multiple PDN Possibility to use different PDNs for multiple network access and services

- Band management Band lock, Used band status display

- APN Auto APN

- Bridge Direct connection (bridge) between mobile ISP and device on LAN

- Passthrough Router assigns its mobile WAN IP address to another device on LAN


WIRELESS

- Wireless mode IEEE 802.11b/g/n, Access Point (AP), Station (STA)

- WiFi security WPA2-Enterprise - PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation

- SSID/ESSID SSID stealth mode and access control based on MAC address

- WiFi users Up to 50 simultaneous connections

- Wireless Hotspot Captive portal (Hotspot), internal/external Radius server, built-in customizable landing page


ETHERNET

- WAN      1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

- LAN      1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX


NETWORK

- Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, NHRP)

- Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)

- VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets

- Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection

- Firewall Port forward, traffic rules, custom rules

- DHCP Static and dynamic IP allocation, DHCP Relay, Relayd

- QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e

- DDNS Supported >25 service providers, others can be configured manually

- Network backup WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover

- Load balancing Balance Internet traffic over multiple WAN connections

- Hotspot Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes

    SSHFS Possibility to mount remote file system via SSH protocol


SECURITY

- Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block

- Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T

- Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)

- VLAN Port and tag-based VLAN separation

- Mobile quota control Custom data limits for SIM card

- WEB filter Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only

- Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter


VPN

- OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods

- OpenVPN Encryption DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256

- IPsec IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)

- GRE GRE tunnel, GRE tunnel over IPsec support

- PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support

- Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code

- DMVPN Method of building scalable IPsec VPNs

- SSTP SSTP client instance support

- ZeroTier ZeroTier VPN client support

- WireGuard WireGuard VPN client and server support

- Tinc Tinc offers encryption, authentication, and compression in its tunnels. Client and server support