ABOUT THIS ECONOHOME 400W PANEL HEATER:
HOW OUR HEATING METHOD WORKS:
Our wall heaters provide heat by convection currents that rise from behind the panel, producing a consistent room temperature. Air is pushed over a convection heating element, allowing warm air to circulate throughout the room.
NEW & IMPROVED HEATING METHOD:
The panel heats the room quickly, while achieving a higher room temperature at the same electrical rating. Our wall mount heaters include a heat reflector, greatly reducing heat loss that would normally be absorbed into the wall. This heater was made with the highest quality components. It conforms to UL-2021 standards, complies with all international safety standards and does not emit any VOC’s!
SLEEK DÉCOR: The exterior casing of this Heater can be painted. We recommend using a no-odor, water-based, no VOC paint of any color to match or enhance the décor of any room.
NO NOISE, NO FANS, NO VENTS! For pet frequented areas, it won't circulate hair around the room!
IDEAL FOR ALLERGY SUFFERERS:
There is NO FAN, which makes our heater ideal for Asthma or Allergy sufferers, and will help prevent congestion & heat irritation, as well as dust accumulation. Perfect for babies, children & adults!
SAVE ON YOUR ENERGY BILL:
EconoHome wall mounted panel heaters are designed to be used for long periods of time at extremely low running cost. It lowers up to 50% of your energy bill & utilizes 0.4 KW/HR., which is less than 1/3 of the energy compared to other conventional space heaters. You may also save money by warming the room of your choice without having to heat the entire house!
HOW TO MOUNT HEATER TO WALL:
- Mark all 4 position holes on the wall from the template.
- Drill the pilot holes for the drywall anchors.
- Screw the drywall anchor into each pilot hole.
- Secure the four mounting legs to the wall by using the 3" screws.
- Align the holes on the heater unit with the mounting legs.
- Firmly screw in the four legs.
- Finalize the position of the heater on the wall while tightening the screws.
- Tighten the cap/nuts over the four mounting posts to lock the unit in place.
CONVECTOR HEATING PANEL SPECS:
- Wattage: 400W
- Volts: 120V
- Room Capacity: Up to 120 Sq. Ft.
- cETL Approved
- RoHS compliant
- Dimensions: 23.5 x 23.5 x ¼ inch
- Cord Length: 1.8 meters
- BTU: 1364
FOR ADDED PROTECTION WE RECOMMEND OUR HEAT-GUARD ACCESSORY (Sold Separately)
We recommend utilizing this accessory in any situation where there is a concern for the heat contact of children and pets. With the use of the HEAT-GUARD, you will prevent the surface area from becoming hot to the touch, and multiply the convection currents making our heater a great addition to your bedroom, bathroom or any area in your home. Our heater is triple-insulated having your children and pets safety in mind while providing a constant source of heat.
| 400W Wall Mount Heater | 400W Wall Mount Heater with Heat Guard | 400W Wall Mount Heater with Glass Heat Guard | 600W Wall Mount Heater | 250W Splashproof Wall Mount Heater- Ideal for Bathroom | 400W Smart Heater with App | |
|---|---|---|---|---|---|---|
| Includes a Heat Guard Cover? | Available for purchase separately | ✓ | ✓ | X | X | Available for purchase separately |
| Ideal for Sq. Ft. Room? | 120 Sq. Ft. | 120 Sq. Ft. | 120 Sq. Ft. | 200 Sq. Ft. | 100 Sq. Ft. | 120 Sq. Ft. |
| Energy Efficient? | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Can be Hardwired? | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Overheat Protection? | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Paintable? | ✓ | ✓ | X | ✓ | ✓ | ✓ |
| Compatible with EZ Mount Accessory? | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Plug-in Thermostat Included? | ✓ | ✓ | ✓ | ✓ | X | X |
| Dimensions | 23.5" x 23.5" | 24" x 24" | 24" x 24" | 24" x 36" | 24" x 18" | 24" x 24" |
| Environmental Safe | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
