eBay

SHIPPING AND DUTY INCLUDED IN PRICE USA AND CANADA

Brand new sealed box

Product characteristics

Number of inputs and outputs

Number of digital outputs: 2; Number of analogue outputs: 1

Measuring range

0.5...143.9 m/s

8...2110 m³/h

0.12...35.18 m³/min

Process connection

threaded connection G 1 internal thread

Application

Installation	Adjustable to inside pipe diameters; (38...254 mm)
Media	compressed air
Medium temperature [°C]	0...60
Pressure rating [bar]	16
Pressure rating [Mpa]	1.6
Pressure rating [psi]	232
MAWP (for applications according to CRN) [bar]	16

Electrical data

Operating voltage [V]	18...30 DC; (to SELV/PELV)
Current consumption [mA]	< 110
Protection class	III
Reverse polarity protection	yes
Power-on delay time [s]	1

Inputs / outputs

Number of inputs and outputs	Number of digital outputs: 2; Number of analogue outputs: 1

Outputs

Total number of outputs	2
Output signal	switching signal; analogue signal; pulse signal; IO-Link; (configurable)
Electrical design	PNP
Number of digital outputs	2
Output function	normally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]	2
Permanent current rating of switching output DC [mA]	250; (per output)
Number of analogue outputs	1
Analogue current output [mA]	4...20; (scalable)
Max. load [Ω]	500
Pulse output	consumed quantity meter
Short-circuit protection	yes
Type of short-circuit protection	pulsed
Overload protection	yes

Measuring/setting range

Measuring range

Measuring/setting range; Flow monitoring; The values apply at: Ø 72 mm

Measuring range

0.5...143.9 m/s

8...2110 m³/h

0.12...35.18 m³/min

Display range

0...172.7 m/s

0...2532 m³/h

0...42.22 m³/min

Resolution

0.1 m/s

2 m³/h

0.02 m³/min

Set point SP

1.2...143.9 m/s

18...2110 m³/h

0.28...35.18 m³/min

Reset point rP

0.5...143.2 m/s

6...2100 m³/h

0.12...35 m³/min

Analogue start point ASP

0...107.9 m/s

0...1582 m³/h

0...26.38 m³/min

Analogue end point AEP

36...143.9 m/s

528...2110 m³/h

8.8...35.18 m³/min

In steps of

0.1 m/s

2 m³/h

0.02 m³/min

Volumetric flow quantity monitoring

Pulse value	1...1000 x 10³
In steps of	1 Nm³
Pulse length [s]	0,7...2 (D = 72 mm)

Temperature monitoring

Measuring range [°C]	0...60
Display range [°C]	-12...72
Resolution [°C]	0.2
Set point SP [°C]	0.4...60
Reset point rP [°C]	0.2...59.8
Analogue start point [°C]	0...45
Analogue end point [°C]	15...60
In steps of [°C]	0.2

Accuracy / deviations

Flow monitoring

Repeatability [% of the measured value]	± 1,5
Accuracy (in the measuring range)	± (6 % MW + 0,6 % MEW); (D = 72mm, T = 22 °C; standard volume flow: 50...850 Nm³/h)

Temperature monitoring

Accuracy [K]	± 2,5 (Q > 2 Nm³/h)

Response times

Flow monitoring

Response time [s]	0.1; (dAP = 0)
Damping process value dAP in steps [s]	0 - 0,2 - 0,4 - 0,6 - 0,8 - 1

Temperature monitoring

Dynamic response T05 / T09 [s]	30 (Q > 2 Nm³/h)

Software / programming

Parameter setting options	Flow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; totaliser

Interfaces

Communication interface

IO-Link

Transmission type

COM2 (38,4 kBaud)

IO-Link revision

1.1

SDCI standard

IEC 61131-9

Profiles

Smart Sensor: Process Data Variable; Device Identification

SIO mode

yes

Required master port type

Process data analogue

Process data binary

Min. process cycle time [ms]

Supported DeviceIDs

Type of operation	DeviceID
Default	381

Operating conditions

Ambient temperature [°C]	0...60
Storage temperature [°C]	-20...85
Max. relative air humidity [%]	90
Protection	IP 65

Tests / approvals

EMC

DIN EN 60947-5-9
DIN EN 61000-6-3

Vibration resistance

DIN EN 60068-2-6

5 g (55...2000 Hz)

MTTF [years]

213

Mechanical data

Weight [g]	539.5
Materials	PBT-GF20; PC; stainless steel (1.4301 / 304); FKM
Materials (wetted parts)	stainless steel (316 / 1.4401); stainless steel (1.4301 / 304); ceramics glass passivated; PEEK; polyester; FKM
Process connection	threaded connection G 1 internal thread

Displays / operating elements

Display

Display unit	4 x LED, green (Nm³/min, Nm³/h, Nm³, °C)
function display	1 x LED, green
switching status	2 x LED, yellow
measured values	alphanumeric display, 4-digit
programming	alphanumeric display, 4-digit

Remarks

Measuring, display and setting ranges refer to the standard volume flow according to DIN ISO 2533.

D = inside pipe diameter

Pack quantity

1 pcs.

Electrical connection

Connection	Connector: 1 x M12; coding: A

Diagrams and graphs

final value of the measuring range referred to the internal pipe diameter