Important! Please check that you have purchased the correct color in the Natural Leather, Vinyl and Leatherette Car Interior Repair Kit.First, carry out a test on an invisible part of the seat, steering wheel or any other element where you want to carry out the repair.Apply a thin layer, about 1-2cm and dry with a hairdryer, check if the color matches the leather.If it happens that the color does not match the leather - don't worry, we will replace the color for you.

STEP 1

Before starting work, thoroughly clean the leather seats, steering wheel and other elements of the car interior with products intended for artificial and natural leather. You also need to dry the surface to be repaired.

STEP 2

 The leather, vinyl and natural leather must be degreased before starting the repair and application of the leather dye. 

STEP 3

After degreasing, paint can be applied. Proceed as follows: First apply a thin layer of paint with a sponge, then dry with a hair dryer for 10-15 minutes. Do the same with subsequent coats, for best results apply 3-4 coats. For use with spray guns or similar, the paint can be diluted with water, but not more than 10%.

STEP 4

After dyeing, it is essential to apply a layer of leather sealant/protective varnish for leather. Not only does it act as a protective layer for the color, it also highlights it and offers a pleasant feeling when touched. Important: After you have finished working with the leather, you should let it rest for 24 hours and do not overexert it.