4K Ultra HD Max 60fps HDMI-compatible USB WiFi GE port imx585 1/1.2" Sensor 4K digital microscope camera 4K
Model No X5CAM4K8MPB
The X5CAM4K series camera is intended for acquisition of digital images from stereo microscopes, biological microscopes, or online interactive teaching. The basic characteristic is listed as below: Sony STARVIS 2 back-illuminated CMOS sensor Connect USB microphone for audio and video recording Camera Application Scientific research, digital teaching (teaching, demonstration and academic discussing); Digital laboratory, medical research; Machine vision (PCB detection, IC quality control); Medical treatment (pathological observation); Food (microbial colony observation and counting); Aviation and military; Camera Feature SONY imx585 Sensor, senzor size:1/1.2" High G sensitivity: 5970(mV/lx/s) Resolution: 4K Ultra HD (8mp 3840x2160) Preview frame rate: 60fps 4K under HDMI output Real time measurement Connect USB microphone support audio and video recording Support U flash disk and SD card storage HDMI, GE port(Ethernet) output, Support UVC, has USB output WiFi output for optional Camera Specification
Note: 1. Camera Frame rate is not fixed, Frame rate relate to camera exposure time, long exposure time will reduce frame rate, So set shorter exposure time can get higher frame rate. Frame rate relate to Computer's hardware too
Camera Pictures
Camera installed SONY imx585 Sensor, senzor size:1/1.2" Resolution: 4K Ultra HD (8mp 3840x2160) 4k/1080P switch adaptively, Under HDMI-output Preview frame rate 60fps@4K Camera Working Pictures 1. HDMI output mode Comply with HDMI2.0 standard. 4K/1080P format video output and supporting automatic switch between 4K and 1080P format according to the connected monitors. Camera can capture photo and recording video under HDMI mode, the photo and video can be saved into SD card or USB drive the photo and video in SD card or USB drive can be replayed on TV monitor 4K Camera connect to 19inch 1080P HDMI TV monitor 4K Camera connect to 55inch 4K TV monitor
Camera Menu
Synthesis Camera Control Toolbar
Camera Control Panel The Camera Control Panel controls the camera to achieve the best video or image quality according to the specific applications; It will pop up automatically when the mouse cursor is moved to the left side of the video window (in measurement status, the Camera Control Panel will not pop up. The Camera Control Panel will only pop up when the measurement process is finished or terminated while user’s cursor on the left edge of the video window). Left-clicking
Camera Measurement Toolbar The Measurement Toolbar will pop up when moving mouse cursor to any place near the upper edge of the video window. Here is the introduction of the various functions on the Measurement Toolbar 2. USB output mode This 4K Camera support UVC, so it can working with computer by USB3.0 port. RisingCam will provide RisingView software for buyer RisingView software support Windows and MAC system User can select different resolution in RisingView software Max 30fps@3840*2160 Max 45fps@2688*1512 Max 60fps@1920*1080 (Note: Camera Frame rate is not fixed, Frame rate relate to camera exposure time, long exposure time will reduce frame rate, So set shorter exposure time can get higher frame rate. Frame rate relate to Computer's hardware too) NOTE: Because USB3.0's UVC function is ISO transmission as required, WIN7 is not supported So USB3.0 output only avaliable for Win8 and Win10 system, Win7 system only support USB2.0 output USB2.0 and USB3.0 has same frame rate. RisingView for Windows RisingView for MAC NOTE: 1. In order to get higher frame in RisingView software , Please select 100% in RisingView The Photo made by 4K Camera's USB output under Zeiss Lab A1 Bilogical microscope Zeiss Lab.A1 Trinocular microscope, Objective lens 4X, Sample:Plant rhizome Zeiss Lab.A1Trinocular microscope, Objective lens 40X, Sample:Plant rhizome 3. GE port Ethernet output mode Connecting multi-cameras to the router through the LAN port/ WiFi STA mode for the network application (The Connecting Manual in our Software CD) Please download Camera manual and video from this link: https://drive.google.com/file/d/18Q0C8KJa0nzsYBrlfRUvBOBrA0FaWCKV/view?usp=sharing Connecting camera to the PC with LAN port In LAN mode, the camera connects to a switch or router (LAN) by Ethernet cable, If a router with WLAN capability is used, users could connect the router wirelessly and control the camera. This application uses the camera as the network camera. User must configure the IP of the camera and PC manually and ensure their IP addresses in the same net. The subnet mask and gateway of the camera and PC must be the same. Start the camera after the camera is running, clicking camera setting button on the Synthesis Camera Control Toolbarat the bottom of the video window, a small window called Settings will pop up as shown below on the left side, clickingLAN property page, uncheck the DHCP item. InputIP Address,Subnet Mask andDefault Gateway for the camera. DesignateInternet Protocol Version 4 (TCP/IPv4) Settings page’s IP address on the PC with similar configuration as shown below on the right side but with differentIP address. the camera also can be connect to PC via Ethernet Cable, So this camera can working with RisingView software in PC This application uses the camera as the network camera. User must configure the IP of the camera and PC manually and ensure their IP addresses are in the same net. The subnet mask and gateway of the camera and PC must be the same. 4. WiFi output mode (WLAN or AP mode) WIFI Output Image to Computer, laptop, Android and Apple IOS mobile device Smart phone, Iphone and Ipad etc. (The PC computer and Laptop computer should has Wireless network card) WiFi Connecting Steps: (1) Install the RisingView on your Computer or install the ToupView app on the mobile device; (2) Plug the USB WLAN adapter into the camera’s USB3.0 port; (3) Connect the camera to the power adaptor and switch it on; (4) Connect the computer or mobile device with the WLAN that the camera provides; (5) The network name (SSID) and the WLAN password (The default one is 12345678) can be found on the camera. (6) Open RisingView on computer or Open app on mobile device, then it can get image from Camera NOTE: RisingView in our Software CD. IOS user Could download ToupView App from Apple App Store (itunes) Android user could download ToupView App from Google Play store App for iOS: download link App for Android:download link 4K Camera connect to Mobile Device WiFi App for Mobile Device (IOS or Android) Just make sure that the mobile device uses iOS 11 or higher/Android 5.1 or higher operating systems. IOS user download ToupView App from Apple App Store (itunes) Android user download ToupView App from Google Play store 4K Camera connect to Laptop computer via WiFi When working with computer via WiFi Output , This camera's WiFi output support Windows, Linux and Mac system RisingView can support Windows XP/Vista/7/8/10 system RisingCam provide RisingView software for MAC and Linux OS RisingView for MAC and Linux System This 4K Camera can working with biological microscope This 4K Camera also good choice for Surgical Operation Microscope The below picture is made by this 4K camera and Surgical Operation Microscope for Ophthalmology RisingView software instruction RisingCam Provide RisingView Software for buyer free. RisingView Download link: https://drive.google.com/file/d/1QDXrVJRZGgD1Nx0AiEP-hpnMZfeC71XC/view?usp=sharing RisingView is professional software integratedwith camera control, image capture&process, image browse image measurement and analysis.RisingView is born with the following features: 1.User-friendly UI design 2.Professional Camera Control Panel 3.Practical functions with good result Image 4. So many measurement toolsMeasurement results can export to Excel list 5. Powerful compatibility RisingView can support Windows XP/Vista/7/8/10 system Sample Pictures PCB sample Biology Sample MK54 Rabbit Emdryo Ovary Taste PineLeaf CornLeaf Sample Photo made by Buyer Camera Size camera body, made from tough, CNC aluminium alloy, ensures a heavy duty, workhorse solution. The camera is designed with a high quality IR-CUT to protect the camera sensor. No moving parts included. This design ensures a rugged, robust solution with an increased lifespan when compared to other industrial camera solutions. Camera Packing The standard packing include
1. 4K camera 2. HDMIcable 3. USB3.0 Cable 4. Mouse 5. Power Supplier (EU, US and UK for choice) 6. USB-WLAN WiFi Adapter (This is optional accessory) Camera Warranty 1 Years
RisingView software instruction RisingCam Provide RisingView Software for buyer free. RisingView Download link: https://drive.google.com/file/d/1MBbHtjEn1krVzVH_Dy2QFEeFU3Okz82a/view?usp=sharing RisingView is professional software integratedwith camera control, image capture&process, image browse image measurement and analysis.RisingView is born with the following features: 1.User-friendly UI design 2.Professional Camera Control Panel 3.Practical functions with good result Image 4. So many measurement toolsMeasurement results can export to Excel list 5. Powerful compatibility RisingView can support Windows XP/Vista/7/8/10 system RisingCam provide RisingView software for MAC and Linux OS RisingView for MAC and Linux System
Warranty period: 1 year
RisingTech always do our best provide excellent Service before/after sales for all buyers. RisingTech will provide our technical support if buyers have any questions of camera operation.
If camera has any quality problem within warranty period and must be returned to workshop repair it, RisingTech will repair camera or replacement new camera for buyer, RisingTech will stand freight.
If camera has quality problem out warranty period, RisingTech will repair camera for buyers too, buyer need stand freight.
If the camera is man-made damaged, no matter within or out warranty period, buyers should stand repair charges and freight.
|