Product Description

OBSBOT Tail Air

Use code of INFICAM04 to take $15 OFF discount


Mastermind On Air

Integrating OBSBOT’s most powerful AI technologies and superior image system into an elegant and classical body, OBSBOT Tail Air could bring you the next-level video streaming experience with the industry-advanced AI Auto Tracking and excellent Multi-Cam setup, mastermind your every moment and unleash your maximum creativity, right on Air.

OBSBOT Tail AIR Key Features

OBSBOT Tail AIR NDI Streaming PTZ Camera

OBSBOT Tail Air User Scenarios

OBSBOT Tail Air
OBSBOT Tail Air

Specification

Dimension: Working State：69.65*73.25*132.5mm; Off State：69.65*73.25*135.5mm
Weight: 344.5g
AI Chip: Integrated AI chip, Trillions of calculations per second
2-axis Gimbal: Controllable range: Pan: ±150°, Tilt: -65°~32°; Mechanical range: Pan: ±160°, Tilt: ±90°
Video resolution: 4K@30/25/24 fps ; 1080@60/50/48/30/25/24 fps
Max video storage bit rate: H264：80Mbps，H265：80Mbps
Video format: MJPEG, H264, H265
Audio input: Built-in Two MEMS Microphones
Audio Modes: Noise Reduction/Stereo Sound
Audio Format: AAC/PCM
Image sensor: 1/1.8'' CMOS
Lens system: 8.4 million; resolution: 3856x2176
Lens system: 8 Optical Lenses, 4X digital zoom; f/1.8 Aperture
ISO range: 100-6400; Exposure Value: ±3EV; White Balance: 2000K-10000K
Electronic shutter speed: 1/8000 s to the limit of frames per second
Focus: Auto Focus/Manual Focus; Equivalent Focal Length: 23mm

Limitless Connection Possibilities: OBSBOT Tail Air to embrace the open possibility of the livetreaming and video shoot with AI-powered enhancement.

OBSBOT Tail AIR

OBSBOT Tail Air FAQ

Can this device shoot upside-down?

Yes, OBSBOT Tail Air can shoot from upside-down. The video image will automatically flip when the device is installed upside-down.

Does OBSBOT Tail Air support recording while livestreaming?

Yes, OBSBOT Tail Air supports live streaming when using the SD card to record the outputted video.

What is the difference in AI Auto Tracking between Tail Air and Tiny 2?

The AI Auto Tracking for Tail Air supports not only Human Tracking but also Animal Tracking and Object Tracking. The feature on Tiny 2 supports Human Tracking only.

What is the requirement of the micro SD card for Tail Air?

We recommend using a U3 micro SD card, and OBSBOT Tail Air supports micro SD cards in exFAT and Fat32 formats (NTFS not included). Its maximum storage capacity is 512GB.

Can OBSBOT Tail Air be used via wifi (without any cable) connected to computer and be used as camera in Google Meet, Microsoft Teams?

You can use the OBSBOT Tail Air as a camera for meeting software (including Google Meet, Microsoft Teams, etc.) over a wireless connection with your computer. This can be done via NDI, RTSP, or by outputting the virtual camera's signal to the appropriate software.

I would like to use 2 OBSBOT Tail Air cameras. What I need to have in order to use this cameras? A switcher or PoE?

To capture a video signal, connect your two devices to the same switcher using either a micro HDMI or USB port. If you need to control the devices, our smart remote can manage up to three at once. For a Power over Ethernet (PoE) connection, use a VISCA-compatible control panel to handle your Tail Air devices. If you're controlling and receiving video signals from more than two Tail Air devices, consider using NDI supported hardware or software.

Can I control the OBSBOT Tail Air with an NDI Controller/Switcher or only with the control?

With NDI丨HX3 support, OBSBOT Tail Air can be controlled via the NDI protocol supported Controller and Switcher.