Description
12V Portable Spot Welder Spot Welding Machine DIY Kit Perfect For Car Batteries Lithium Batteries
Description:
The circuit board of this spot welder can be used for welding 18650/26650/32650 lithium batteries. It is portable, stable, reliable, durable, and cost-effective. It can be connected to your car starter battery, or a high-power battery pack. Just connect it and you can use it!
Users need to prepare their own 12V battery for power supply, and the welding current is about 100A~200A. It is suitable for common 0.1mm~0.15mm nickel-plated sheets. Please make sure that your battery can have a current greater than 100A, otherwise it fails to weld!
Features:
- 2MM long-life soldering needle adopts cold pressing process. With extremely low internal resistance, it can withstand extremely high temperatures
- Super soft silicone wires can be bent at will, making operation easier
- 35CM soldering pens make it more convenient to weld
- Fastening screws adopt non-slip flange nuts and Phillips screws to increase the area which current passes
- Cold pressing process and large-area contact pure copper joints can effectively reduce internal resistance
Parameters:
- Power supply voltage: 11.5V-14.8V
- Working current: 100-200A (best current: 150A. Discharge below 100A, it will not work)
A battery with a large discharge current will directly affect the welding effect. The following batteries are recommended:
* 36-45ah Lead-acid battery with good performance and small internal resistance (internal resistance is less than 10 milliohms, discharge current is greater than 100A), such as a new car starter battery!
* 4000mah 35C-8000mah 30C 3S model airplane lithium battery pack
* 30-35ah capacity 18650 battery pack
Power Supply Requirements:
- Spot welding uses the principle of rapid local heating and cooling with high current, and requires sufficient current supply. Generally, the current of 0.1-0.15 nickel-plated sheet welding is about 90-150A, so the working power supply of the circuit board must be greater than or equal to 150A.
- The following battery packs can be used as working power sources: 12V car starter power, 3S high-rate battery pack for model airplane, three-string high-rate lithium battery pack, 409003 string battery pack for Hitachi, lead-acid batteries with good performance above 12V20A.
- Calculation formula: capacity x discharge rate = load capacity. Take 4000ma aeromodelling battery as an example, the discharge rate is 45C (4Ax45C=180A).
Package Included:
- 1 x Spot Welder Kit
Note:
- Batteries are not included.
Description:
The circuit board of this spot welder can be used for welding 18650/26650/32650 lithium batteries. It is portable, stable, reliable, durable, and cost-effective. It can be connected to your car starter battery, or a high-power battery pack. Just connect it and you can use it!
Users need to prepare their own 12V battery for power supply, and the welding current is about 100A~200A. It is suitable for common 0.1mm~0.15mm nickel-plated sheets. Please make sure that your battery can have a current greater than 100A, otherwise it fails to weld!
Features:
- 2MM long-life soldering needle adopts cold pressing process. With extremely low internal resistance, it can withstand extremely high temperatures
- Super soft silicone wires can be bent at will, making operation easier
- 35CM soldering pens make it more convenient to weld
- Fastening screws adopt non-slip flange nuts and Phillips screws to increase the area which current passes
- Cold pressing process and large-area contact pure copper joints can effectively reduce internal resistance
Parameters:
- Power supply voltage: 11.5V-14.8V
- Working current: 100-200A (best current: 150A. Discharge below 100A, it will not work)
A battery with a large discharge current will directly affect the welding effect. The following batteries are recommended:
* 36-45ah Lead-acid battery with good performance and small internal resistance (internal resistance is less than 10 milliohms, discharge current is greater than 100A), such as a new car starter battery!
* 4000mah 35C-8000mah 30C 3S model airplane lithium battery pack
* 30-35ah capacity 18650 battery pack
Power Supply Requirements:
- Spot welding uses the principle of rapid local heating and cooling with high current, and requires sufficient current supply. Generally, the current of 0.1-0.15 nickel-plated sheet welding is about 90-150A, so the working power supply of the circuit board must be greater than or equal to 150A.
- The following battery packs can be used as working power sources: 12V car starter power, 3S high-rate battery pack for model airplane, three-string high-rate lithium battery pack, 409003 string battery pack for Hitachi, lead-acid batteries with good performance above 12V20A.
- Calculation formula: capacity x discharge rate = load capacity. Take 4000ma aeromodelling battery as an example, the discharge rate is 45C (4Ax45C=180A).
Package Included:
- 1 x Spot Welder Kit
Note:
- Batteries are not included.
Payment Terms
1.We accept PayPal only.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2.All major credit cards are accepted through secure payment processor PayPal.
3.Payment must be received within 7 business days of auction closing.
4.We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
- For remote regions, we will charge your extra shipping costs. Usually it cost about 35USD-50USD. We will contact you after your payment. Thanks for your understanding.
Return Terms
1. If you receive defective item, please kindly notify us within 14 days. We will guide you the returning instruction for replacement or refund.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
2. If you purchased in improper condition, please NOTE that the sipping and handling fee will not be refund, all return shipping fee should paid by the buyer unless item DOA.
3. We reserve the right to refuse any returns for objective reasons.
Custom Duties & Taxes
1. Import duties, taxes, and charges are not included in the item price or postage cost. These charges are the buyer's responsibility.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
2. Avoiding some unnecessary trouble, please check with your country's customs office to inform us what we should declare its value before shipping.
Feedback
1. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
2. If you are satisfied with the product you received, please kindly leave us a positive feedback and 5 star DSR. If there is any problem of your order, please feel free to contact us firstly, we are responsible and credible seller, will follow it for you asap.
