Description:
One Pair(2 Bulbs) H3 6000K Clear White 80W/ Pair , 8000LM/ Pair
Super Bright LED Bulbs Headlight Conversion Kit High And Low Beam / Fog Light / Driving Light / Daytime Running Light
One Pair(2 Bulbs) H3 6000K Clear White 80W/ Pair , 8000LM/ Pair
Super Bright LED Bulbs Headlight Conversion Kit High And Low Beam / Fog Light / Driving Light / Daytime Running Light
Features:
-Bulb Size: H3
-Application: Headlight High Beam And Low Beam / Fog Light
-LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
-LED chip high power 80W/ Pair
-Color Temperature: 6000K Clear White
-Lumens: 8000LM/ Pair, no blind zone
-Working Voltage: DC 12V to 24V
-Lifespan: 80,000 working hours, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
-Bulb Size: H3
-Application: Headlight High Beam And Low Beam / Fog Light
-LED replacement bulbs are engineered for superior performance, exceptional looks, and increased safety.
-LED chip high power 80W/ Pair
-Color Temperature: 6000K Clear White
-Lumens: 8000LM/ Pair, no blind zone
-Working Voltage: DC 12V to 24V
-Lifespan: 80,000 working hours, stable quality, long service life
-Aluminum heat sink design,built-in automotive circuit to prevent electronic interference.
-The model is the same as factory light, no need to change car wire rute,just Plug and Play, NO modification required
-Energy saving, environmental protection, Stable performance, through strict test, Use safer driving in the car
Product performance:
1. This product is made of 3570 lamp beads and consists of 2 with constant current
2. This light source adopts imported chips with stable quality and long service life
3. The power of this product is only 1/20 of the traditional halogen lamp, using more energy-saving and environmental protection
4. This product is used by LED constant current drive, with stable performance and strict testing.
It is safer to drive on the car;
5 This product can be applied to various models
1. This product is made of 3570 lamp beads and consists of 2 with constant current
2. This light source adopts imported chips with stable quality and long service life
3. The power of this product is only 1/20 of the traditional halogen lamp, using more energy-saving and environmental protection
4. This product is used by LED constant current drive, with stable performance and strict testing.
It is safer to drive on the car;
5 This product can be applied to various models
H3 LED Fog Lights Bulb
Ultra-small Ultra-light design, Mini size, the same as the car original light, suit for most of car models.
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
Built-in constant current CPU, instant full brightness without start-up relay
All-in-one aluminum profile as heat conduction system, 360 degree heat radiating, keep the light bulb in appropriate working temperature
LED headlight advantages:
1.LED lamps are more energy and power than conventional halogen lamps.
2.The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
3.Instantly start without strong current impact, improve battery life by more than 30%.
4.Fast cooling , using the most advanced, heat-dissipating structural design.
5.The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
6.Low heating temperature, The working temperature of helium can reach 800°-1000°
7.LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
8.Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.
Ultra-small Ultra-light design, Mini size, the same as the car original light, suit for most of car models.
Engineering beam pattern design throw more light on road evenly at appropriate angle without foggy light
Xenon white light reflect road paint/signs better to show clearer road situation during night driving
270 degree low beam angle with cut-off line,will not dazzle oncoming traffic
Built-in constant current CPU, instant full brightness without start-up relay
All-in-one aluminum profile as heat conduction system, 360 degree heat radiating, keep the light bulb in appropriate working temperature
LED headlight advantages:
1.LED lamps are more energy and power than conventional halogen lamps.
2.The brightness is close to the xenon lamp, but the LED lights are illuminated without delay to enhance road safety.
3.Instantly start without strong current impact, improve battery life by more than 30%.
4.Fast cooling , using the most advanced, heat-dissipating structural design.
5.The power driver adopts a wide voltage constant current mode which has a simple structure, so that the automobile can flexibly cope with various voltage unstable conditions, and has achieved the purpose of less component damage. Compared to HID ballast maintenance, The repair probability is very low which is less than 80%.
6.Low heating temperature, The working temperature of helium can reach 800°-1000°
7.LED headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
8.Car LED headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 6000K.
Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
Package Included:
2 LED Bulbs H3