.png?versionId=YU112HPFsRhJc6F2NjoP4CmDVr8O3RjE)
Important: The GBP price for this listing does include VAT.
For countries outside of the U.K, VAT will be collected by eBay upon checkout.
The TA043 is an active differential probe suitable for high common-mode voltage measurement applications up to ±700 V (DC + peak AC). It can be used with signal speeds of up to 100 MHz.
This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses.
The TA043 is an active probe powered by either four AA batteries, included, or the TA531 USB to DC Jack power lead, also included as standard. The TA531 is intended for use with generic USB wall chargers (not included).
| TA043 differential probe specifications | |
|---|---|
| Bandwidth | DC to 100 MHz (–3 dB) |
| Attenuation ratio | 10:1 / 100:1 |
| Accuracy | ±2% |
| Input impedance | 4 MΩ || 7 pF each side to ground |
| Input voltage | |
| Differential range (10:1) Differential range (100:1) |
±70 V (DC + peak AC) or 70 V RMS ±700 V (DC + peak AC) or 500 V RMS |
| Common mode range | ±700 V (DC + peak AC) or 500 V RMS (10:1 and 100:1) |
| Absolute max. voltage (differential or common-mode) |
1000 V RMS CAT III (10:1 and 100:1) |
| Output voltage | |
| Swing | ±7V into 50 kΩ load |
| Offset (typical) | <±5 mV |
| Noise (typical) | 0.9 mV RMS |
| Source impedance (typical) | 50 Ω |
| CMRR (typical) | 85 dB @ 50 Hz; 55 dB @ 1 MHz |
| Ambient operating Temperature | –10 to 40 ℃ |
| Ambient storage temperature | –30 to 70 ℃ |
| Power requirements | |
| Standard | 4xAA cells or 6 V DC / 200 mA mains adaptor or regulated 9 V DC / 120 mA mains adaptor |
| Length of input leads | 30 cm |
| Length of BNC lead | 90 cm |
| Weight | 500 g |
| Dimension (LxWxH) | 202 mm x 83 mm x 38 mm |
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an item, as that will allow us to post your item to you sooner!
We offer FREE shipping on all UK orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product for an exchange, or refund.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Important: The GBP price for this listing does include VAT.
For countries outside of the U.K, VAT will be collected by eBay upon checkout.
The TA043 is an active differential probe suitable for high common-mode voltage measurement applications up to ±700 V (DC + peak AC). It can be used with signal speeds of up to 100 MHz.
This differential probe extends the functionality of standard single-ended input oscilloscopes to allow a safe and accurate method of making high-voltage differential measurements. Applications include making safe measurements in power circuit applications and acquisition of low-speed balanced differential signals found in serial communications buses.
The TA043 is an active probe powered by either four AA batteries, included, or the TA531 USB to DC Jack power lead, also included as standard. The TA531 is intended for use with generic USB wall chargers (not included).
| TA043 differential probe specifications | |
|---|---|
| Bandwidth | DC to 100 MHz (–3 dB) |
| Attenuation ratio | 10:1 / 100:1 |
| Accuracy | ±2% |
| Input impedance | 4 MΩ || 7 pF each side to ground |
| Input voltage | |
| Differential range (10:1) Differential range (100:1) |
±70 V (DC + peak AC) or 70 V RMS ±700 V (DC + peak AC) or 500 V RMS |
| Common mode range | ±700 V (DC + peak AC) or 500 V RMS (10:1 and 100:1) |
| Absolute max. voltage (differential or common-mode) |
1000 V RMS CAT III (10:1 and 100:1) |
| Output voltage | |
| Swing | ±7V into 50 kΩ load |
| Offset (typical) | <±5 mV |
| Noise (typical) | 0.9 mV RMS |
| Source impedance (typical) | 50 Ω |
| CMRR (typical) | 85 dB @ 50 Hz; 55 dB @ 1 MHz |
| Ambient operating Temperature | –10 to 40 ℃ |
| Ambient storage temperature | –30 to 70 ℃ |
| Power requirements | |
| Standard | 4xAA cells or 6 V DC / 200 mA mains adaptor or regulated 9 V DC / 120 mA mains adaptor |
| Length of input leads | 30 cm |
| Length of BNC lead | 90 cm |
| Weight | 500 g |
| Dimension (LxWxH) | 202 mm x 83 mm x 38 mm |
We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an item, as that will allow us to post your item to you sooner!
We offer FREE shipping on all UK orders!
Your order will be dispatched within 1 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch.
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product for an exchange, or refund.
You can return a product for up to 30 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.