About Receiver:
1. Operating voltage: AC100-240V
2. Static state: less than 6mA
3. Operating temperature: -40 degree +80 degree
4. Receiver sensitivity: -105dBm or higher
5. Operating frequency: 433mhz
6. Output voltage: DC and AC are optional
7. Max load current: 10A
8. Size: 96*80*29mm
How to work:
Learning button changes the way you work
Moment: Press the learn button once. Relay: Long Press->On; Release->Off
Toggle: Press the learn button twice. Relay:-> Press On. Press the same button again-> Off.
Latch: Press the learn button 3 times. Relay:-> Press On. Press Other Button-> Off.
2 channeur momentary + 2 channeu latches: Press the learn button 4 times.
2 Channeur Momentary + 2 Channeu Toggles: Press the learning button 5 times.
2 Channeur Toggle + 2 Channeu Latches: Press the learn button 6 times.
Learning and Clear Method:
LEARNING: When you press the learning button, the indicator flashes and turns off, loosens your finger, press any of the buttons on the remote transmitter, the indicator flashes 3 times, meaning that the learning success (how many times you need to press the learning button)
Clear: Press and hold the learning button for about 8 seconds, the indicator light flashes several times, then turn off and press the remote. The relay didn't respond to. This means that the code is clear successfully.
About Transmitter:
1. Button: 4 buttons
2. Operating voltage: DC6V (2PCS CR2016)
3. Operating frequency: 433MHz
4. Remote distance: 20-50M
5. Working current: 13 mAh
6. Encode: EV1527 code
7. Size: 5.7 x 3.2 x 1.1cm
Package Includes:
1 x Remote Controller or 2 x Remote Controller
1 x Receiver
1 x User Manual