Fiber optic package parameters:(Optional)
16W light engine fiber:(200Pcs*0.75mm*3m)*2Pcs
9w Meteor Fiber:120Pcs*1.0mm*3m
16W light engine fiber:(200Pcs*0.75mm*4m)*2Pcs
9w Meteor Fiber:120Pcs*1.0mm*4m
16W light engine fiber:(300Pcs*0.75mm*3m)*2Pcs
9w Meteor Fiber:120Pcs*1.0mm*3m
16W light engine fiber:(300Pcs*0.75mm*4m)*2Pcs
9w Meteor Fiber:120Pcs*1.0mm*4m
16W light engine fiber:(450Pcs*0.75mm*3m)*2Pcs
9w Meteor Fiber:120Pcs*1.0mm*3m
16W light engine fiber:(450Pcs*0.75mm*4m)*2Pcs
9w Meteor Fiber:120Pcs*1.0mm*4m
16W light engine fiber:(550Pcs*0.75mm*3m)*2Pcs
9w Meteor Fiber:120Pcs*1.0mm*3m
16W light engine fiber:(550Pcs*0.75mm*4m)*2Pcs
9w Meteor Fiber:120Pcs*1.0mm*4m
16W METEOR TWINKLE EFFECT CAR STAR ROOF LIGHT FIBER OPTIC LIGHT
Twinkle fiber optic light Parameter:
POWER: 16W
Input voltage: DC12V
LED: RGBW LED
COLOR: RGBW (14 colors)
Light source device size: L84xW105xH60mm
Fiber head inner diameter: 20mm* 2 (each connect head can install optical fiber 550pcs of 0.75mm ,or 300pcs of 1.0mm optical fiber , or 135pcs of 1.5mm )
Remote: RF/Bluetooth
Warranty: 2 years
Lifetime: 50,000 hours
Meteor fiber optic light Parameter:
Meteor Fiber Optic Light Parameter:
【Super Meteor Effect】with RGB lamp bead, you can get the Red/Green/Blue/Yellow/Cyan/Purper Etc (White Light is Not included). up to 7 color and chasing light effect shooting star effect.
【Upgraded Bluetooth APP】Fiber optic light is controlled by cellphone (Android / iPhone), just download the APP and turn on Bluetooth. No worries about remote missed or broken. Multiple Modes for you to choose. Speed are adjustable. Perfect for Home Theater, car, house,room, hotel, restaurant, entertainment, KTV etc.
Specification
-Power: 9W
-Input voltage:DC 12V
-Color: RGB
-LED: 12 LEDs
-Fiber head inner diameter: 7mm (Each LED port can install 65 pcs of 0.75MM optical fibers or 35 pcs of 1.OMM optical fibers.Not included, please contact us if needed.)
-Light body material:Aluminum
-Light source device size:L173*W29*H26mm(Dimensions: L6 x W1.2 x H0.8inch)
-Lifetime: 50,000 hours
-Remote: RF / bluetooth 4.0 APP(The device be controlled by the remote control board and APP at the same time. Remote control board battery use CR2025)
-App control: APP control
20 meteor modes for you to choose.
Speed are adjustable.
Smartphone APP Control:
1. Please download the“My smart LED”APP
2. Connect to the light
(1) open open the mobile phone bluetooth;
(2) power on the light; then open the APP;
(3) at this time, the app will automatically connect to light
****Note: You cannot click the name of the light in the Bluetooth list of your phone, but wait for the light to link to your phone automatically.
(4) When thenumber appear in left top corner, the APP successfully connects to the machine.
(5) Click on switch in the middle of app ,to turn on the fiber optic light.
Package included:
1x 16W RGBW Twinkle Light Engine
1x 9W Meteor Light Engine
1x RF Controller
1x Power Cable
1 x Car Cigarette Plug
2x Connectors
3 x Fiber Optic
1 x User Manual
**If you are in a car, please choose Car cigarette plug. The EU/US/UK/AU power plug is for indoor use.
INSTALLATION TUTORIAL
1.Remove the car roof
Remove the roof of the car first(Overturn Copilot or seat,remove it from the back door)
2. Drill holes
you can use the pen to draw the point ,then use a 0.5mm-1.5mm twist drill bit to drill holes.
lf you want to make complex patterns, such as stars, galaxies, etc., you can paste a pattern on the back of the ceiling then Punch holes according to the pattern . Simple patterns can be directly Just draw holes in the ceiling.
3. Insert fiber
4. Fixed fiber
Use hot melt glue or kafuter K-5905 glue to fix.
5. Straighten the fiber
Straighten the optical fiber lines(ens of small bundles), and the concentrated parts can be rolled with black electric tape so tha tthey will not be scattered.
6. Stick sponge or leather
Stick sponge or leather to isolate the iron sheet to extend the life of the optical fiber.
7. Cut the fiber
Cut off the excess fibers in thecar, usually cut it flat to the roof.You can also cut the fiber after installing the roof.
8. Electrical connection
The power supply can be connected to the cigarette lighter plug,low beam, driving light, ACC, and the required power supply voltage is 12V. The LED light source can be hidden in the C-pillar or the trunk. Finally, Put the car roof back on .
For all orders, please note that:
Taxes and charges are not included in the item price or shipping charges.
1.If you have any questions, please contact us via ebay mail, we will reply you on the working day in China, and there will be no reply on the weekend, we will reply on Monday. Because the time zone between the seller and the buyer is different, please be patient and wait for your understanding. We will be happy to serve you.
2.OUR WORKING Time(Beijing): 9:00am~6:00pm(Monday~Friday)
We encourage our customers to contact in order to resolve any issues regarding the transaction before leave negative feedback on eBay. Please make sure to contact us before you leave feedback.