13GPM Hydraulic Log Splitter Pump, Logsplitter，2 Hi Stage Lo Gear Pump, ½"Shaft
The 2-Stage Pump Can Give You Faster Cycle Times and Higher Possible Pressure with a Small Engine. Excellent for Use on Log Splitters. 85% Efficient.
Suggested Applications: Presses, Log Splitters, Clamping Units and Compacto
Specifications:
Displacement (ml/r): 10.9/3.6
Large pump rated pressure (MPa): 2.5
Small pump rated pressure (MPa): 20
Rated speed (r/min): 3600
New Hydraulic Log Splitter Pump 13 Gpm
Displacement (ml/r): 10.9/3.6
Large pump rated pressure (MPa): 2.5
Small pump rated pressure (MPa): 20
Rated speed (r/min): 3600
New Hydraulic Log Splitter Pump 13 Gpm
Model:10.9/3.6
Shaft: ½"
Inlet Port: 150mm
Outlet Port: 230mm
Minimum 8 Hp or Larger Gas Engine.
For Use with Open Center Hydraulic Systems Only
Maximum Pressure: 3000 Psi
Bolt Circle: 2.83in.
4 Holes Spaced 2" on Center
Mounting Hole Diameter: 344in
Woodruff Key: 1/8in
Rotation Is Clockwise
This 2 Stage Pump Can Give You Much Faster Cycle Times and Higher Possible Pressures with a Small Engine. Excellent for Use on Log Splitters. 85% Efficient.
The Hi/Lo Section of the Pump Is All Aluminum and the End Plates Are Cast Steel. Applications for the Hi/Lo Pump Are Log Splitters, Presses Etc Where Rapid Movement of the Cylinder at Low Pressure Is Required Prior to Automatically Switching to the High Pressure Mode to Meet Load Requirements.
Packing Include:
1 Pc 13 Gpm Hydraulic Log Splitter Pump
Shaft: ½"
Inlet Port: 150mm
Outlet Port: 230mm
Minimum 8 Hp or Larger Gas Engine.
For Use with Open Center Hydraulic Systems Only
Maximum Pressure: 3000 Psi
Bolt Circle: 2.83in.
4 Holes Spaced 2" on Center
Mounting Hole Diameter: 344in
Woodruff Key: 1/8in
Rotation Is Clockwise
This 2 Stage Pump Can Give You Much Faster Cycle Times and Higher Possible Pressures with a Small Engine. Excellent for Use on Log Splitters. 85% Efficient.
The Hi/Lo Section of the Pump Is All Aluminum and the End Plates Are Cast Steel. Applications for the Hi/Lo Pump Are Log Splitters, Presses Etc Where Rapid Movement of the Cylinder at Low Pressure Is Required Prior to Automatically Switching to the High Pressure Mode to Meet Load Requirements.
Packing Include:
1 Pc 13 Gpm Hydraulic Log Splitter Pump
