Product Description

Model: S886
Voltage: 24V/36V/48V
Current: constant current
Motor angle: 60/120 degrees
Static current: MAX20A

Ordinary connector wire length: about 180M
Waterproof connector wire length: about 20CM
Protocol;UART

Meter and controller match the serial communication protocol, so can not work alone or with other different protocols of the controller can not be used after the connection!
Consult customer service staff before shooting 

 

Meter function
 4.Setting P01: Backlight brightness, 1 level is the darkest, 3 level is the brightest;
P02: Mileage unit, 0: km; 1: mile;
P03: Voltage level: 24V, 36V, 48V, default 36V;
P04: dormant time: 0, not dormant; other numbers are dormant time, range: 1-60; unit minutes;
P05: Boost gear: 0: 3-speed mode;
P06: Wheel diameter: unit, inch; precision: 0.1;
P07: Number of speed measuring magnets: range: 1-255;
P08: Speed limit: range 0-100km/h, 100 means no speed limit; 1. Communication status (controller control): the input data here indicates the maximum running speed of the vehicle: for example, input 25, it means that the maximum running speed of the vehicle will not be more than 25km/h; the driving speed is maintained at the set value, error: ±1km/h; (power assisted and handlebar are limited to speed). Note: The value here is based on kilometers, when the unit setting is changed from kilometers to miles, the speed value in the display interface will be automatically converted to the correct value of miles, but the data of the speed limit value set in this menu under the mile interface will not be converted, which is not the same as the actual display of the speed limit value of miles; Attention: The P09-P15 menus are only valid in the communication state.
P09: Zero start, non-zero start setting, 0: zero start; 1: non-zero start;
P10: Driving mode setting 0 : Boost drive (decide how much boost is output through the boost gear, at this time the turntable is invalid). 1 : Electric drive (decide how much boost is output through the boost gear, at this time the turntable is invalid). 1 : Electric drive (driven by the handlebar, the power assist gear is invalid at this time). 5 2 : Co-existence of power assist and electric drive (electric drive is invalid in zero start state).
P11: Boost sensitivity setting 1-24;
P12: Boost start strength setting 0-5;
P13: Setting of booster magnet disk type: 5, 8 and 12 grains;
P14: Controller current limit value setting default 12A, range: 1-20A;
P15: Controller undervoltage value;
P16: ODO Zero Setting Press and hold the plus key for 5 seconds to zero the ODO;


Packing:

1*DISPLAY



Our Advantages

Pre-sales service

        1. Provide free consultation to solve customer's confusion and provide free technical support.

          2. carefully study customer needs, according to the customer's actual installation situation to provide a detailed, suitable solution environment.

In-sale service

           1. Try our best to meet the reasonable needs of customers.

           2. 2. Keep close contact with customers during each business period.

           3. Co-operate with customers in a friendly manner to meet their needs with the best quality products.

After-sales service

         1. train customers how to install and use the e-bikes for free.

         2. Provide one year free warranty for common products.

         3. perfect after-sales service to help customers solve problems in the process of using.

         4. Provide regular tracking service for customers.

 

Shipping                                                                                                                                                                                   

        1. Depending on the location of the item, items will be shipped from CN stock or US stock within 1-3 business days. 2.

 

         2. In some cases, the shipping date may be delayed due to out of stock. We will notify you by email.

 

         3. Please leave a usable address and phone number in the shipping information. The seller is not responsible for incorrect addresses.

 

          4. Please indicate your personal requirements such as colour, packaging etc. when making payment.

 

        5. 5. We will not be responsible for any delays in the delivery process, including but not limited to customs postage checks, strikes, coercive measures etc. 

 

Return Policy                                                                                                                                                                                        

        1. Returned items must be unused and in the same condition and original packaging as when received.

        2. 2. Once a return is approved, it is the buyer's responsibility to return the product and pack it properly to prevent any damage during shipping.

       3. 3. If you receive an item and are not satisfied, please contact me before returning it. Then return it within 30 days for a replacement or refund. Postage will not be refunded.